*mydirectindustry

800X Series

Product catalog summary

Overview
The document outlines the technical specifications and features of WOB-L™ Piston Air Compressors and Vacuum Pumps, specifically models 8003, 8005, 8006, and 8009. These devices are designed for applications in the medical, laboratory, automotive, and equipment manufacturing sectors.

Features

Service-free and oil-less operation.
Compact design with low vibration.
Suitable for continuous operation.
Wetted parts vary by model, with heat-resistant plastics and elastomer valves for models 8003/8005/8006, and corrosion-resistant aluminum and stainless steel valves for model 8009.
Long-life, high-performance piston seal made from PTFE compound.

Specifications

Flow rates range from 2.5 to 7.2 l/min depending on the model.
Maximum pressure up to 2.5 bar.
Maximum vacuum up to 80% for certain models.
Electrical options include both DC and AC motors, with various power consumption levels and insulation classes.
Ambient and media temperature ranges from 10 to 60°C.

Applications

Medical industry.
Laboratory and analysis technology.
Automotive industry.
Equipment manufacturing.

Technical Data

Detailed pneumatic and electrical data for each model, including flow rates, pressures, motor types, and power consumption.
Flow curves and performance graphs provided for visual reference.

General Information

All data is based on nominal units and standard atmospheric conditions.
Users are responsible for determining the suitability of the product for their specific applications.
Thomas does not assume liability for the information provided.

Pneumatic Data Overview

8005V Series: Max flow rates of 4.8 to 6.0 l/min and max vacuum levels of 73% to 78%. Operates at 230 V/50 Hz with a shaded pole motor.
8006D Series: Max flow rates of 13.0 to 15.8 l/min and max pressure of 3.0 bar. Available in both AC and DC versions, with options for noise reduction and brushless motors.
8006V Series: Max flow rates of 14.2 to 15.8 l/min and max vacuum of 80%. Available in AC and DC configurations.
8006ZV Series: Max flow rates up to 31.0 l/min and max vacuum of 80%. Offers parallel and series configurations.
8009 Series: Max flow rates of 11.0 to 14.0 l/min and max pressure of 7.0 bar. Available in both AC and DC versions with various motor types.

Electrical Data

Most models operate at 230 V/50 Hz or 12/24 V DC.
Power consumption ranges from 39 W to 138 W depending on the model.
Motor insulation classes vary between E and F.

General Data

Ambient and media temperatures are generally between 10 to 40 °C, with some models allowing media temperatures up to 60 °C.
Weight varies from 0.93 kg to 2.5 kg depending on the model.

Options and Configurations

Noise reduction heads and brushless DC motors are available as options for certain models.
Models are available with different head configurations and outlet connectors.

Flow Curves and Model Keys

Flow curves are provided for each model, illustrating performance at various pressures and vacuums.
Model keys explain the series, piston diameter, motor type, and other specifications.

Function Colour Control

Pin 1 (V Supply Red): Operates at 12 VDC with a maximum voltage range of 10 to 18 VDC, and 24 VDC with a maximum voltage range of 10 to 28 VDC.
Pin 2 (Ground Black): Serves as the ground for both the V supply (Pin 1) and Speed Control (Pin 3).
Pin 3 (Speed Control White): Accepts an analog input of 0 to 5 VDC with a maximum of 28V. It also supports PWM with a frequency range of 6 to 20 kHz and a duty cycle of 14 to 96%. The speed voltage input threshold is 0.2 V.
Pin 4 (Tacho Out Green): Outputs 18 pulses per revolution with a pulse time "LOW" of 195 µs. The output level "LOW" is 0 to a maximum of 0.5 V, and "HIGH" is a minimum of 4 V to a maximum of 5 V.

Additional Components and Options

Includes a speed input and output circuit with specified resistances and capacitances for signal processing.
Optional adapter for 2-wire duty includes a potentiometer for manual speed adjustment.
Part numbers for adapters: P/N 29011930 for 12VDC "red" and P/N 29011931 for 24VDC "black".

Notes

Document printed in Germany.
Contact information for Gardner Denver Thomas GmbH is provided for further inquiries.

Catalog excerpts

WOB-L™ Piston Air Compressors and Vacuum Pumps MODELS 8003 8005 8006 8009 TYPICAL APPLICATIONS • Service free and oil-less • Compact design B • alanced for smooth, low vibration operation • Suitable for continuous running W • etted parts S – eries 8003/8005/8006 heat resistant high performance plastic, Elastomer valves S • – eries 8009 corrosion resistant aluminium parts, stainless steel valves • – ong-life, high performance piston L seal (PTFE compound) • Medical industry • aboratory and Analysis L technology • Automotive • Equipment manufacturing Consult factory for customized solutions

Open the catalog to page 1

WOB-L Piston Compressor 8003D DC 3,0 l/min 2,0 bar Pneumatic Data Description 12 V DC 24 V DC Max. flow Max. pressure Max. continuous pressure Max. restart pressure Electrical Data otor type M ominal voltage N ominal speed N Power consumption Motor insulation class General Data mbient temperature A Media temperature eight W Port direction All listed values measured at standard atmospheric conditions. Flow Curves Flow [l/min] Motor type 2 1,5 1 The information presented in this material is based on technical data and test results of nominal units. It is believed to be accurate and reliable and...

Open the catalog to page 2

WOB-L Piston Compressor 8003D BLDC 4,3 l/min 2,0 bar Pneumatic Data Description Part number 12 V DC 24 V DC Max. flow Max. pressure Max. continuous pressure Max. restart pressure Electrical Data Brushless DC Motor type Nominal speed 0..4.600 rpm Nominal voltage 12/24 V DC integrated with reverse supply voltage protection Drive electronics 8,5 W Max. power consumption Motor insulation class B Protection class IP20 Connector Housing: Molex KK 22-01-2045 Terminal: Molex KK 08-50-0031 Function Colour Wiring diagram Pin 1 V Supply Red Optional: dapter for 2-wire duty A incl. potentiometer for Pin...

Open the catalog to page 3

WOB-L Piston Compressor 8003ZDP DC 5,4 l/min 2,0 bar Pneumatic Data Description Part number 12 V DC Max. flow Max. pressure Max. continuous pressure Max. restart pressure Electrical Data otor type M ominal voltage N ominal speed N ower consumption P otor insulation class M General Data mbient temperature A Media temperature eight W Port direction Configuration All listed values measured at standard atmospheric conditions. Flow Curves Model key: Z = Double head E = EPDM D = Pressure P = Parallel Motor type The information presented in this material is based on technical data and test results of...

Open the catalog to page 4

WOB-L Piston Vacuum Pump 8003V DC 3,0 l/min 59 % Pneumatic Data Description 12 V DC 24 V DC Max. flow Max. vacuum Max. restart vacuum Electrical Data otor type M ominal voltage N ominal speed N ower consumption P otor insulation class M General Data mbient temperature A Media temperature eight W ort direction P All listed values measured at standard atmospheric conditions. Flow Curves V = Vacuum E = EPDM Motor type 2 1,5 1 The information presented in this material is based on technical data and test results of nominal units. It is believed to be accurate and reliable and is offered as an aid...

Open the catalog to page 5

WOB-L Piston Vacuum Pump 8003V BLDC 4,3 l/min 65 % Flow Final Vacuum Pneumatic Data Description Part number 12 V DC 24 V DC Max. flow Max. intermittent vacuum Max. continuous vacuum Max. restart vacuum Electrical Data Brushless DC Motor type Nominal speed 0..4.600 rpm Nominal voltage 12/24 V DC integrated with reverse supply voltage protection Drive electronics 7W Max. power consumption Motor insulation class B Protection class IP20 Connector Housing: Molex KK 22-01-2045 Terminal: Molex KK 08-50-0031 Function Colour Wiring diagram Pin 1 V Supply Red Optional: dapter for 2-wire duty A incl. potentiometer...

Open the catalog to page 6

WOB-L Piston Vacuum Pump 8003ZVR/ZVP DC 5,4 l/min 80 % Pneumatic Data Description Part number 12 V DC Max. flow Max. vacuum Max. restart vacuum Electrical Data otor type M ominal voltage N ominal speed N ower consumption P otor insulation class M General Data mbient temperature A Media temperature eight W ort direction P Configuration All listed values measured at standard atmospheric conditions. Model key: Z = Double head E = EPDM V = Vacuum R = Series Motor type The information presented in this material is based on technical data and test results of nominal units. It is believed to be accurate...

Open the catalog to page 7

WOB-L Piston Compressor 8005D DC 7,2 l/min 2,5 bar Pneumatic Data Description Part number 12 V DC 24 V DC* Max. flow Max. pressure Max. continuous pressure Max. restart pressure Electrical Data otor type M ominal voltage N ominal speed N ower consumption P otor insulation class M General Data mbient temperature A edia temperature M Weight Port direction Due to a difference in nominal speeds the 24 V DC units have a 10% reduced flow rate when compared to the 12 V DC units. * All listed values measured at standard atmospheric conditions. The information presented in this material is based on technical...

Open the catalog to page 8

WOB-L Piston Compressor 8005D AC 6,0 l/min 2,5 bar Pneumatic Data Description Part number 230 V/50 Hz Max. flow Max. pressure Max. continuous pressure Max. restart pressure Electrical Data otor type M ominal voltage N ominal speed N ower consumption P otor insulation class M hermal switch T General Data mbient temperature A Media temperature Weight Port direction All listed values measured at standard atmospheric conditions. Flow Curves 4 3 2 The information presented in this material is based on technical data and test results of nominal units. It is believed to be accurate and reliable and...

Open the catalog to page 9

WOB-L Piston Vacuum Pump 8005V DC 7,2 l/min 78 % Pneumatic Data Description Part number 12 V DC 24 V DC* Max. flow Max. vacuum Max. restart vacuum Electrical Data Motor type ominal voltage N ominal speed N ower consumption P otor insulation class M General Data mbient temperature A edia temperature M Weight Port direction Due to a difference in nominal speeds the 24 V DC units have a 10% reduced flow rate when compared to the 12 V DC units. * All listed values measured at standard atmospheric conditions. Flow Curves The information presented in this material is based on technical data and test...

Open the catalog to page 10

800X Series

800X Series

Catalog excerpts

All Gardner Denver Thomas catalogs and technical brochures

Archived catalogs