*mydirectindustry

617 Series

Product catalog summary

Overview: The document provides technical specifications and performance data for the 617 Series models (617CA22, 617CA32, 617CD22, 617CD32) manufactured by Thomas Division, an ISO 9001 registered company. These models are designed for pressure and vacuum applications.

Features:

Oil-less, non-lube piston and cylinder for maintenance-free operation.
Permanently lubricated bearings and stainless steel valves for durability.
Lightweight die-cast aluminum components and a high-performance piston seal.
Thin wall, hard-coated aluminum cylinder for efficient heat transfer.
Low noise design with a balanced operation for reduced vibration.
Equipped with a 115 Volt, UL recognized motor and thermal protector.
Field service capability and CE approval for 220 Volt 50 Hertz models.

Performance Data:

Models operate at different voltages (115v and 220v) and frequencies (60Hz and 50Hz).
Flow rates vary by model and pressure, with maximum continuous pressure up to 100 psi (6.9 bar) for certain models.
Maximum vacuum capabilities reach up to 26.8 inches Hg (-907 mbar).
Ambient temperature range for operation is 50°F to 104°F (10°C to 40°C).
Motor specifications include shaded pole type, with varying current and power ratings depending on the model.

Model Specifics:

617CA22: Offers a flow rate of 0.78 cfm at 0 psi, with a maximum continuous pressure of 100 psi.
617CA32: Provides a higher flow rate of 1.22 cfm at 0 psi, with a maximum intermittent pressure of 60 psi.
617CD22: Operates at 220v, with a flow rate of 0.69 cfm at 0 psi and a maximum continuous pressure of 100 psi.
617CD32: Also at 220v, offers a flow rate of 1.01 cfm at 0 psi, with a maximum intermittent pressure of 40 psi.

Additional Information: The document includes contact details for Thomas Division and notes that the information is based on nominal units and test results. Users are responsible for determining product suitability for their applications.

Catalog excerpts

Oil-less, non-lube piston and cylinder Permanently lubricated bearings Stainless steel valves Lightweight die cast aluminum components Long-life, high performance piston seal Thin wall, hard coated aluminum cylinder for maximum heat transfer Low noise design 115 Volt, UL recognized motor and thermal protector Balanced for smooth, low vibration operation Intake filter Six foot cord and plug assembly Field service capability C E approval on all standard 220 Volt 50 Hertz models Consult factory for custom applications Thomas Division is an ISO 9001 registered company

Open the catalog to page 1

617 Series Performance Data MODEL NUMBER HEAD CONFIGURATION Standard Standard l/min @ mbar (gauge) mbar (gauge) MIN. AMBIENT START TEMP. Shaded Pole Shaded Pole Shaded Pole Shaded Pole CURRENT AT RATED LOAD (AMPS) POWER AT RATED LOAD (WATTS) STARTING CURRENT (LOCKED ROTOR, AMPS) CAPACITOR VALUE MIN. FULL LOAD SPEED (RPM) THERMAL PROTECTOR MOTOR VOLTAGE/FREQUENCY MOTOR TYPE The information presented in this material is based on technical data and test results of nominal units. It is believed to be accurate and reliable and is offered as an aid to help in the selection of Thomas products. It is...

Open the catalog to page 2

All Gardner Denver Thomas catalogs and technical brochures

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list