500 Series
2Pages

Catalog excerpts

FEATURES • Custom designed for Refrigerant Recovery applications • • • • • • • • • • All wetted aluminum parts treated for corrosion protection from moisture Lightweight die cast aluminum components Oil-less, non-lubricated piston and cylinder Permanently lubricated ball bearings Balanced for smooth, low vibration and quiet operation C ompatible with Refrigerants R-11, R-12, R-22, R-113, R-114, R-123 R-134A, R-404A, R-410A, R-500 and R-502 Minimum Compression Ratio = 50:1 (11" Hg @ 435 psig and 29.5" Hg barometer) Liquid Recovery Rate: 3-5 lb/min* Vapor Recovery Rate: .3-.5 lb/min* Liquid compatible Head/Valve system *Recovery rates may vary depending on recovery system design Consult factory for custom applications Thomas Division is an ISO 9001 registered company

Open the catalog to page 1

500 Series Performance Data MODEL NUMBER HEAD CONFIGURATION BLACK LEAD PIPE PLUG WIRING DIAGRAM MOTOR SHELL SEAM 3X 1/4(.250)-20 7.58 ±.04 RED/WHITE STRIPE LEAD 1/8-27 NPT INTAKE PORT (PULL PLUG) INSULATED FEMALE QUICK DISCONNECT (.250 X .032) 1/8-27 NPT EXHAUST PORT (PULL PLUG) RECTIFIER & CAPACITOR TO BE TAPED IN THIS AREA mbar (gauge) MIN. AMBIENT START TEMP. MOTOR VOLTAGE/FREQUENCY MOTOR TYPE Rectified DC Permanent Magnet Rectified DC Permanent Magnet CURRENT AT RATED LOAD (AMPS) POWER AT RATED LOAD (WATTS) STARTING CURRENT (LOCKED ROTOR, AMPS) CAPACITOR VALUE MIN. FULL LOAD SPEED (RPM)...

Open the catalog to page 2