*mydirectindustry

415 Series

Product catalog summary

Overview: The 415 Series models 415CDC30/12 and 415CDC30/24 are designed for heavy-duty applications, featuring oil-less, non-lubricated pistons and cylinders, stainless steel valves, and lightweight die-cast aluminum components. These models are built for durability and high performance, with a focus on smooth, low vibration operation and corrosion protection.

Specifications: The models operate with a maximum continuous pressure of 100 PSI (6.9 bar) and a maximum vacuum of 24.6"hg (-833 mbar) for the 12V model and 23.8"hg (-806 mbar) for the 24V model. They are equipped with a permanent magnet motor, thermal protection, and are capable of field service.

Performance Data: The 415CDC30/12 model provides a flow rate of up to 0.92 CFM (26.1 LPM) at 12V, while the 415CDC30/24 model offers up to 0.70 CFM (19.8 LPM) at 24V. Both models maintain performance across various pressure levels, ensuring reliability in diverse conditions.

Environmental Conditions: The maximum ambient air temperature for operation is 104°F (40°C), with a minimum ambient start temperature of 50°F (10°C). The models are designed to restart under a maximum pressure of 100 PSI and a maximum vacuum of 24.6"hg for the 12V model and 23.8"hg for the 24V model.

Construction and Materials: The models feature permanently lubricated ball bearings, aluminum valve plates, and a thin wall, hard-coated aluminum cylinder for optimal heat transfer. All wetted aluminum parts are treated for corrosion protection, and other wetted parts are made of stainless steel.

Additional Information: The Thomas Division is ISO 9001 registered, ensuring quality and reliability. For custom applications, consultation with the factory is recommended. The models are designed with a focus on ease of maintenance and long service life.

Catalog excerpts

FEATURES • Designed for heavy-duty applications • Oil-less, non-lubricated piston and cylinder • Permanently lubricated ball bearings • Stainless steel valves • Aluminum valve plates • Lightweight die cast aluminum components • Long life, high performance piston cup • hin wall, hard-coated aluminum cylinder for maximum heat transfer T • Balanced for smooth, low vibration operation • Field service capability • ll wetted aluminum parts treated for corrosion A protection from moisture • All other wetted parts stainless steel • Intake filter Consult factory for custom applications Thomas Division is an ISO 9001 registered company

Open the catalog to page 1

415 Series Performance Data MODEL NUMBER HEAD CONFIGURATION mbar (gauge) MIN. AMBIENT START TEMP. MOTOR VOLTAGE/FREQUENCY MOTOR TYPE Permanent Magnet CURRENT AT RATED LOAD (AMPS) Permanent Magnet POWER AT RATED LOAD (WATTS) STARTING CURRENT (LOCKED ROTOR, AMPS) CAPACITOR VALUE MIN. FULL LOAD SPEED (RPM) THERMAL PROTECTOR The information presented in this material is based on technical data and test results of nominal units. It is believed to be accurate and reliable and is offered as an aid to help in the selection of Thomas products. It is the responsibility of the user to determine the suitability...

Open the catalog to page 2

All Gardner Denver Thomas catalogs and technical brochures

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list