*mydirectindustry

405 Series

Product catalog summary

Overview: The document provides technical specifications and performance data for the 405 Series compressors, including models 405AA38, 405AD38, 405ADC38/12, and 405ADC38/24. These compressors are designed for single-cylinder, oil-less operation with features aimed at durability and efficiency.

Key Features:

Single-cylinder, oil-less, non-lube piston and cylinder design.
Permanently lubricated bearings and stainless steel valves.
Lightweight die-cast aluminum components with corrosion protection.
High-performance PTFE compound piston seal and hard-coated aluminum cylinder for heat transfer.
Balanced for smooth, low-vibration operation.
Available in 115 Volt (UL recognized) and 220 Volt (CE approved) configurations.

Performance Data:

Model 405AA38: Operates at 115v with a flow rate of up to 9.0 LPM at 0 PSI, maximum continuous pressure of 20 PSI, and maximum intermittent pressure of 40 PSI.
Model 405AD38: Operates at 220v with a flow rate of up to 7.5 LPM at 0 PSI, similar pressure specifications as 405AA38.
Model 405ADC38/12: Operates at 12v DC with a flow rate of up to 22.3 LPM at 0 PSI, maximum pressure of 100 PSI.
Model 405ADC38/24: Operates at 24v DC with a flow rate of up to 18.6 LPM at 0 PSI, maximum pressure of 100 PSI.

Environmental and Operational Conditions:

Maximum ambient air temperature: 104°F (40°C).
Minimum ambient start temperature: 50°F (10°C).
All models include a thermal protector for safety.

Construction and Design:

All wetted aluminum parts are treated for corrosion protection.
Stainless steel used for all other wetted parts.
Dimensions and mounting specifications provided for installation guidance.

Additional Information:

Thomas Division is ISO 9001 registered, ensuring quality management standards.
Consult the factory for custom applications and detailed physical descriptions.

Catalog excerpts

Single cylinder Oil-less, non-lube piston and cylinder P ermanently lubricated bearings Stainless steel valves A luminum valve plates L ightweight die cast aluminum components L ong-life, high performance PTFE compound piston seal T hin wall, hard-coated aluminum cylinder for maximum heat transfer Consult factory for custom applications Thomas Division is an ISO 9001 registered company B alanced for smooth, low vibration operation F ield service capability A ll wetted aluminum parts treated for corrosion protection from moisture A ll other wetted parts stainless steel 1 15 Volt, UL recognized motor and thermal protector (AC only) 2 20 Volt, CE approved

Open the catalog to page 1

405 Series Performance Data MODEL NUMBER HEAD CONFIGURATION Pressure Only Pressure Only Pressure Only Pressure Only MIN. AMBIENT START TEMP. Permanent Magnet Permanent Magnet MOTOR VOLTAGE/FREQUENCY MOTOR TYPE Shaded Pole Shaded Pole CURRENT AT RATED LOAD (AMPS) 1.65 POWER AT RATED LOAD (WATTS) 110 STARTING CURRENT (LOCKED ROTOR, AMPS) CAPACITOR VALUE MIN. FULL LOAD SPEED (RPM) THERMAL PROTECTOR

Open the catalog to page 2

PIPE PLUG 1/4-18 NPT (EXHAUST) -A- COOLING AIR FLOW DIRECTION UNIT SPECIFICATIONS: REFER TO LINE TEST SPECIFICATIONS LEAD CONFIGURATION: LEAD LENGTH - LINE: (WHITE/WHITE) AS SUPPLIED FAN CONFIGURATION: LEAD END - NONE OPP. LEAD END - 633398 FAN ASSEMBLY (SPRING CLIP IN) PAINT COLOR: GRAY SHALE The information presented in this material is based on technical data and test results of nominal units. It is believed to be accurate and reliable and is offered as an aid to help in the selection of Thomas products. It is the responsibility of the user to determine the suitability of the product for his...

Open the catalog to page 3

405 Series

405 Series

Catalog excerpts

All Gardner Denver Thomas catalogs and technical brochures

Archived catalogs