*mydirectindustry

230 Series

Product catalog summary

Model Overview:
The 230ZA30/12 model is part of the 230 Series by Thomas Division, an ISO 9001 registered company. This model features an oil-less non-lube piston and cylinder, permanently lubricated bearings, stainless steel valves, and lightweight die-cast aluminum components. It is designed for smooth, low vibration operation with corrosion-protected aluminum parts. The brushless DC motor offers variable output, long life, and low energy consumption. A motor controller is required for operation, with the optional Thomas controller available as SK CNTLR.

Specifications:

Head Configuration: Pressure Only
Stroke: 0.30 Inches
Flow at 12 VDC @ 2,000 RPM: 0.38 CFM (10.0 LPM) to 0.25 CFM
Max Continuous Pressure: 30 PSI (2.07 bar)
Max Intermittent Pressure: 30 PSI (2.07 bar)
Max Ambient Air Temp: 104°F (40°C)
Min Ambient Air Temp: 50°F (10°C)
Max Restart Pressure: 0 PSI (0 bar)
Motor Voltage/Frequency: 12 VDC
Motor Type: Brushless DC (BLDC)
Current at Rated Load: 3.3 Amps
Power at Rated Load: 40 Watts
Net Weight: 1.2 lbs

Performance Data:
Performance data is based on technical data and test results of nominal units. The information is believed to be accurate and reliable, intended to aid in the selection of Thomas products. Users must determine the product's suitability for their intended use and assume all associated risks and liabilities.

Connection Details:

Exhaust and Intake: Pull Plug with 1/8 NPT Connector Assembly
Connector Assembly Part No.: AMP Part No.: 3-640440-8
Positioning for Electrical Connections: VDC+, Hall Sensors, Ground, and Phases A, B, C

Additional Notes:
Models pictured are representative of the series and do not represent a specific model number. Consult the factory for a detailed physical description. The product is available in limited quantity and is not intended for production use.

Catalog excerpts

Oil-less non-lube piston and cylinder Permanently lubricated bearings Stainless steel valves Cylinder hard coated for wear resistance Lightweight die cast aluminum components Balanced for smooth, low vibration operation All wetted aluminum parts treated for corrosion protection Brushless DC motor for variable output, long life and low energy consumption Consult factory for custom applications. Brushless DC technology requires motor controller to operate. Order SK CNTLR for optional Thomas controller. *Available in limited quantity – not intended for use in production. Thomas Division is an ISO 9001 registered company

Open the catalog to page 1

230 Series Performance Data MODEL NUMBER HEAD CONFIGURATION Pressure Only LABEL LOCATION INTAKE (PULL PLUG) MOTOR VOLTAGE/FREQUENCY MOTOR TYPE CURRENT AT RATED LOAD (AMPS) PIPE PLUG LABEL LOCATION INTAKE (PULL PLUG) INTAKE (PULL PLUG) Bottom View LABEL LOCATION NO OPEN PORT (AS CAST) (.35) POWER AT RATED LOAD (WATTS) CAPACITOR VALUE EXHAUST (PULL PLUG) MIN. FULL LOAD NPT 1/8 SPEED (RPM) Data per T09-0150 *TEST DATA TAKEN AT 2000 RPM The information presented in this material is based on technical data and test results of nominal units. It is believed to be accurate and reliable and is offered...

Open the catalog to page 2

All Gardner Denver Thomas catalogs and technical brochures

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list