*mydirectindustry

2220 Series

Product catalog summary

Overview: The document provides technical specifications and features of the 2220 Series Parallel Pressure DC Voltage Base Model, specifically the 12V BLDC version. It highlights the product's oil-less operation, durable components, and eco-friendly compliance.

Specifications:

Flow: 1.14 cfm (32.3 l/min)
Max Pressure: 30 psi (2.1 bar)
Nominal Voltage Input: 12V DC
Variable Output Speed: 1,000 to 3,000 rpm
Motor Type: 8 Pole Brushless DC, 3 phase
Operating Temperature: 50° to 104°F (10° to 40°C)
Net Weight: 1.48 lbs (0.7 kg)

Features:

Oil-less operation for clean air and reduced maintenance.
Permanently lubricated bearings and stainless steel valves for optimal life and performance.
Die-cast aluminum components for strength and durability.
Brushless DC motor for variable output, long life, and low energy consumption.
RoHS compliant for eco-friendliness.

Customer Requirements:

Supplemental cooling air flow integration into the thermal management system.
BLDC motor requires a motor controller, with an optional Thomas controller available.

Performance Data:

Maximum open air flow varies with speed: 0.40 cfm at 1,000 rpm, 0.78 cfm at 2,000 rpm, and 1.14 cfm at 3,000 rpm.
Current at rated pressure ranges from 7.0A to 8.1A.
Power at rated pressure ranges from 84W to 105W.

Additional Information: The document emphasizes the need for users to determine the product's suitability for their intended use and assumes no liability for the information provided. It also notes that the models pictured are representative and not specific to any model number.

Catalog excerpts

PARALLEL PRESSURE (DC VOLTAGE) BASE MODEL DC Voltage (12V BLDC) CUSTOM CONFIGURED OPTION • Stroke (Flow and/or pressure) FEATURES (BENEFITS) • Oil-less operation (Clean air stream, less maintenance) • Permanently lubricated bearings (Optimum life) • Stainless steel valves (Optimum life, consistent performance, corrosion resistance) • igh performance piston seal (Optimum life) H • ie-cast aluminum components (Strong, lightweight, durable) D • hin wall, hard coated aluminum cylinder (Maximum heat transfer) T • etted parts treated for corrosion resistance (Optimum life, consistent performance) W • Dynamically balanced (Low operating vibration) • Brushless DC motor (Variable output, long life, low energy consumption) • RoHS compliant (Green, eco-friendly) CUSTOMER REQUIREMENTS • Supplemental cooling air flow for compressor to be integrated into thermal management system • BLDC motor requires motor controller - SKCNTLR optional Thomas controller available in sample quantities Qualified OEM designers should consult factory for evaluation quantities • 920-457-4891 or [email protected] Thomas Division is an ISO 9001 registered company

Open the catalog to page 1

2220 Series (BLDC) 1.14 cfm (32.3 l/min) 30 psi (2.1 bar) Pressure only Flow [l/min] Flow Max. pressure Max. vacuum Pressure [psi] 2220 BLDC Series Flow Curve Consult factory for custom stroke options Model Number Performance Data Head configuration Pressure parallel flow Stroke 0.30 in (7.6 mm) Nominal voltage input 12V DC 12V DC 13.2V DC Variable output speed 1,000 rpm 2,000 rpm 3,000 rpm Maximum open air flow 0.40 cfm ( 1.3 l/min) 1 0.78 cfm ( 2.1 l/min) 2 1.14 cfm (32.3 l/min) Maximum operating pressure 30 psi ( 2.1 bar) 30 psi ( 2.1 bar) 30 psi ( 2.1 bar) Current at rated pressure 7.0A 7.1A...

Open the catalog to page 2

2220 Series

2220 Series

Catalog excerpts

All Gardner Denver Thomas catalogs and technical brochures

Archived catalogs