*mydirectindustry

215 Series

Product catalog summary

Overview: The document provides technical specifications for the 215ADC38 series models, specifically 215ADC38/12 and 215ADC38/24. These models are designed with oil-less, non-lube pistons and cylinders, stainless steel valves, and lightweight die-cast aluminum components. They feature a built-in check valve, hard-coated aluminum cylinder, and a long-life PTFE compound piston ring.

Features: Key features include balanced operation for low vibration, inlet unloader or pressure restart, built-in inlet filter, field service capability, dust and moisture resistance, and permanently lubricated motor shaft and connecting rod bearings.

Specifications:

Model 215ADC38/12: Operates at 12v DC with a permanent magnet motor. It has a maximum continuous pressure of 120 PSI (8.3 bar) and a duty cycle of 10% (3 minutes on / 30 minutes off). The maximum ambient air temperature is 158°F (70°C), and the minimum ambient start temperature is -40°F (-40°C). The motor current at rated load is 16.0 amps, with a power of 50.0 watts and a starting current of 3650 RPM. The net weight is 3 lbs (1.4 kg).
Model 215ADC38/24: Operates at 24v DC with a permanent magnet motor. It shares the same maximum continuous pressure and duty cycle as the 12v model. The motor current at rated load is 7.5 amps, with a power of 26.0 watts and a starting current of 3400 RPM. The net weight is also 3 lbs (1.4 kg).

Performance Data: The performance data is based on technical data and test results of nominal units. Users are responsible for determining the suitability of the product for their intended use.

Contact Information: Thomas Division, 1419 Illinois Ave, Sheboygan, WI 53081 USA. Phone: (920) 457-4891, Fax: (920) 451-4276, Website: www.gd-thomas.com.

Catalog excerpts

Oil-less, non-lube piston and cylinder Stainless steel valves Lightweight, die-cast aluminum components Built-in check valve Hard-coated aluminum cylinder for maximum piston wear life Balanced for smooth, low vibration operation Long-life, high performance PTFE compound piston ring Inlet unloader or pressure restart Built-in inlet filter Field service capability Dust and moisture resistant Permanently lubricated motor shaft and connecting rod bearings Consult factory for custom applications Thomas Division is an ISO 9001 registered company

Open the catalog to page 1

215 Series Performance Data MODEL NUMBER HEAD CONFIGURATION Pressure Only Pressure Only MAX. DUTY CYCLE (MINUTES ON/OFF AT 23°C) MIN. AMBIENT START TEMP. MOTOR VOLTAGE/FREQUENCY MOTOR TYPE Permanent Magnet CURRENT AT RATED LOAD (AMPS) POWER AT RATED LOAD (WATTS) STARTING CURRENT (LOCKED ROTOR, AMPS) THERMAL PROTECTOR MIN. FULL LOAD SPEED (RPM) The information presented in this material is based on technical data and test results of nominal units. It is believed to be accurate and reliable and is offered as an aid to help in the selection of Thomas products. It is the responsibility of the user...

Open the catalog to page 2

All Gardner Denver Thomas catalogs and technical brochures

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list