*mydirectindustry

135 Series

Product catalog summary

Overview: The document provides technical specifications for the 135 Series models 135ADC56/12 and 135ADC56/24, highlighting their features, performance data, and operational parameters.

Features: The models are designed with oil-less, non-lube piston and cylinder, stainless steel and silicone valves, lightweight plastic components, and a built-in check valve. They are balanced for smooth, low vibration operation and include a long-life, high-performance PTFE compound piston ring. Additional features include a built-in inlet filter, dust and moisture resistance, permanently lubricated motor shaft and connecting rod bearings, and RoHS compliance.

Specifications: Both models have a pressure-only head configuration with a stroke of 0.56 inches. The 135ADC56/12 operates at 12V DC, while the 135ADC56/24 operates at 24V DC. They have a maximum continuous pressure of 87 psi (6.0 bar) and a maximum intermittent pressure of 100 psi (8.3 bar) for the 12V model and 120 psi (8.3 bar) for the 24V model. The duty cycle is 1 minute on and 20 minutes off at 23°C, with a maximum ambient air temperature of +149°F (+65°C) and a minimum ambient start temperature of -22°F (-30°C).

Performance Data: The flow rates for both models are provided at various pressures, with the maximum flow at 0 psi being 0.54 cfm (15.3 lpm). The motor type is a permanent magnet, with the 12V model drawing 7.9 amps and the 24V model drawing 3.8 amps at rated load. The net weight of each model is 1.16 lb (0.53 kg).

Additional Information: The document notes that the information is based on technical data and test results of nominal units and advises users to determine the suitability of the product for their intended use. It also provides contact information for Thomas Division and notes that the models pictured are representative of the series.

Catalog excerpts

Oil-less, non-lube piston and cylinder Stainless steel and silicone valves Lightweight plastic components Built-in check valve Balanced for smooth, low vibration operation Long-life, high performance PTFE compound piston ring Built-in inlet filter Dust and moisture resistant Permanently lubricated motor shaft and connecting rod bearings RoHS compliant (Green, eco-friendly) Consult factory for custom applications Thomas Division is an ISO 9001 registered company

Open the catalog to page 1

135 Series Performance Data MODEL NUMBER HEAD CONFIGURATION Pressure Only Pressure Only MAX. DUTY CYCLE (MINUTES ON/OFF AT 23°C) MIN. AMBIENT START TEMP. MOTOR VOLTAGE MOTOR TYPE Permanent Magnet Permanent Magnet CURRENT AT RATED LOAD (AMPS) POWER AT RATED LOAD (WATTS) IN-RUSH CURRENT (LOCKED ROTOR, AMPS) CAPACITOR VALUE MIN. FULL LOAD SPEED (RPM) THERMAL PROTECTOR EXHAUST PORT FOR .156 (4mm) TUBE. PUSH TO CONNECT. INLET FILTER (-) TERMINAL The information presented in this material is based on technical data and test results of nominal units. It is believed to be accurate and reliable and is...

Open the catalog to page 2

All Gardner Denver Thomas catalogs and technical brochures

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list