*mydirectindustry

115 Series

Product catalog summary

Overview: The document provides technical specifications and features for the 115ADC56 series models, specifically 115ADC56/12 and 115ADC56/24. These models are designed for pressure applications and are characterized by their oil-less, non-lube piston and cylinder, stainless steel valves, and lightweight die-cast aluminum components.

Key Features:

Oil-less, non-lube piston and cylinder for maintenance-free operation.
Stainless steel valves for durability.
Lightweight, die-cast aluminum components for ease of handling.
Built-in check valve and inlet filter for operational efficiency.
Hard-coated aluminum cylinder for extended piston wear life.
Balanced design for smooth, low vibration operation.
Long-life, high-performance PTFE compound piston ring.
Dust and moisture resistant, with field service capability.
Permanently lubricated motor shaft and connecting rod bearings.

Performance Data:

Both models operate at a maximum continuous pressure of 120 PSIG (8.3 bar) with a duty cycle of 10% (3 minutes on / 30 minutes off).
Maximum ambient air temperature is 158°F (70°C) and minimum ambient start temperature is -22°F (-30°C).
Both models have a maximum restart pressure of 120 PSIG (8.3 bar).
115ADC56/12 operates at 12V DC with a current of 9.0 amps and power of 32.0 watts.
115ADC56/24 operates at 24V DC with a current of 6.0 amps and power of 15.0 watts.
Both models have a minimum full load speed of 4000 RPM and a net weight of 1.6 lbs (0.7 kg).

Additional Information: The document notes that the models are representative of the series and advises consulting the factory for detailed physical descriptions and custom applications. Thomas Division is an ISO 9001 registered company, ensuring quality and reliability in their products.

Catalog excerpts

Oil-less, non-lube piston and cylinder Stainless steel valves Lightweight, die-cast aluminum components Built-in check valve Hard-coated aluminum cylinder for maximum piston wear life Balanced for smooth, low vibration operation Long-life, high performance PTFE compound piston ring Built-in inlet filter Field service capability Dust and moisture resistant Permanently lubricated motor shaft and connecting rod bearings Consult factory for custom applications Thomas Division is an ISO 9001 registered company

Open the catalog to page 1

115 Series Performance Data MODEL NUMBER HEAD CONFIGURATION Pressure Only Pressure Only MAX. DUTY CYCLE (MINUTES ON/OFF AT 23°C) MIN. AMBIENT START TEMP. MOTOR VOLTAGE/FREQUENCY MOTOR TYPE Permanent Magnet CURRENT AT RATED LOAD (AMPS) Permanent Magnet POWER AT RATED LOAD (WATTS) STARTING CURRENT (LOCKED ROTOR, AMPS) The information presented in this material is based on technical data and test results of nominal units. It is believed to be accurate and reliable and is offered as an aid to help in the selection of Thomas products. It is the responsibility of the user to determine the suitability...

Open the catalog to page 2

All Gardner Denver Thomas catalogs and technical brochures

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list