Oil-less, non-lube piston and cylinder Stainless steel valves Long-life, high performance PTFE compound piston ring Lightweight, diecast aluminum components Hard-coated aluminum cylinder for maximum heat transfer Balanced for smooth, low vibration operation Field service capability Barb fittings for 3/16" to 1/4" tubing Permanently lubricated motor shaft and connecting rod bearings 115 Volt, UL recognized motor and thermal protector Consult factory for custom applications Thomas Division is an ISO 9001 registered company

014 Series Performance Data MODEL NUMBER HEAD CONFIGURATION mbar (gauge) MIN. AMBIENT START TEMP. MOTOR VOLTAGE/FREQUENCY Shaded Pole Shaded Pole Permanent Magnet CURRENT AT RATED LOAD (AMPS) POWER AT RATED LOAD (WATTS) STARTING CURRENT (LOCKED ROTOR, AMPS) CAPACITOR VALUE MIN. FULL LOAD SPEED (RPM) THERMAL PROTECTOR MOTOR TYPE

Dimensions 014CA, 014CD LINE TERMINALS INTAKE PORT (WHITE) Ø1.89 EXHAUST PORT (RED) RED LEAD (+) BLACK LEAD (-) 1.89 (4) Ø.155 CORED THRU HOLES FOR #8-32 THREAD FORMING SCREW NOTE: TAPPED PORTS ARE 1/4-28 UNF-2B The information presented in this material is based on technical data and test results of nominal units. It is believed to be accurate and reliable and is offered as an aid to help in the selection of Thomas products. It is the responsibility of the user to determine the suitability of the product for his intended use and the user assumes all risk and liability whatsoever in connection...