Filler coils for balustrades THIS DOCUMENT IS THE PROPERTY OF GANTOIS INDUSTRIES – It may not be disclosed to third parties and/or reproduced without the written permission of GANTOIS INDUSTRIES, and its contents can not be disclosed

COIL Application example BALUSTRADE INFILL The most efficient and economical perforated balustrade infill: minimal waste when cutting to size, quick and simple to use. PERFOLISSE® coil can be cut according to the length required for your balustrade or barrier rails. Alternate weld of approx. 200 mm 2 to 3 mm gap Plain margins on the long edges ensure a precise finish. SIZES Size The available standard sizes are (in mm): • 25 000 x 350 mm • 25 000 x 450 mm Width 450 with strengthening edge folds Width 350 with profile edging assembled Thickness The PERFOLISSE® coil have a thickness of 2 mm. PERFOLISSE...

MATERIALS Steel S235JR Steel • DD11 Steel • Standard: NF EN 10025-2 Recommendations: To avoid risk of corrosion, we recommend applying an anti-corrosion surface treatment for relevant to your application. The material is suitable for hot-dip galvanising. Standard: NF EN 10327 Recommendations: To avoid risk of corrosion , we recommend applying an anti-corrosion surface treatment for relevant to your application. GANTOIS INDUSTRIES 25, rue des quatre frères Mougeotte DOWNLOAD THE FULL RANGE OF PERFORATED PLATES AVAILABLE FROM STOCK ON OUR WEB SITE