*mydirectindustry

XL A101

Product catalog summary

Key Features
Q.bloxx XL is part of the Q.series product family, designed for distributed installations requiring high performance and custom sensor terminations. It features modular, DIN Rail mountable enclosures for easy system expansion and reduced noise due to shorter sensor cable runs. Key specifications include:

RS485 fieldbus interface with speeds up to 48 Mbps.
Compatibility with Controller Q.station X.
Electromagnetic Compatibility per EN61000-4 and EN55011.
Power supply range of 10 to 30 VDC.
Two universal analog input channels supporting various sensor types.
High-accuracy digitization with a 24-bit ADC and 100 kHz sample rate per channel.
Signal conditioning with 16 virtual channels and various processing features.
3-Way galvanic isolation at 500 VDC.

Technical Data
Analog Input: Two channels with typical accuracy of 0.01% and isolation voltage of 500 VDC. Measurement modes include voltage, current, resistance, RTD, potentiometer, bridge, thermocouple, and IEPE sensor.
Voltage Measurement: Ranges from ±60 V to ±100 mV with varying errors and resolutions.
Current Measurement: Range of ±25 mA with an internal shunt resistor of 50 Ω.
Resistance/RTD Measurement: Supports 2- and 4-wire configurations with specific ranges and errors.
Thermocouple Measurement: Supports multiple types with specific temperature ranges and deviations.
IEPE Sensor Measurement: Ranges of ±10 V and ±1 V with specific errors and resolutions.

Digital Inputs/Outputs
Two channels with a response time of 0.2 ms, supporting input status, tare, reset, and output status, alarm.

Communication Interface
Supports proprietary Localbus, ASCII, and Modbus RTU protocols with specific data formats and electrical standards.

Power Supply
Input voltage range of 10 to 30 VDC with overvoltage and overcurrent protection. Power consumption is approximately 2 W.

Environmental Specifications
Operating temperature range from -20°C to +60°C, storage temperature from -40°C to +85°C, and relative humidity of 5% to 95% at 50°C, non-condensing.

Mechanical Information
Constructed from aluminium and ABS, with dimensions of 30 x 145 x 135 mm and a weight of approximately 500 g.

Ordering Information
Article number 495026 with various accessories available.

Catalog excerpts

Gantner instruments Q.bloxx XL A101Universal Measurement Module Q.bloxx XL is a new addition to the Q.series product family - the ideal DAQ solution for widely distributed installations that require higher performance and custom sensor terminations. Q.bloxx XL products are packaged in modular, DIN Rail mountable enclosures that easily snap together for system expansion. Flexibility in distribution allows for highly synchronized data that is less prone to noise due to shorter sensor cable runs to the subject. ■ RS485 fieldbus interface up to 48 Mbps: LocalBus, up to 115.2 kbps: Modbus-RTU, ASCII ■ Connectable to Controller Q.station X ■ Electromagnetic Compatibility according to EN61000-4 and EN55011 ■ Power supply 10 ... 30 VDC ■ DIN rail mounting (EN60715) Key Features ■ 2 Universal analog input channels Voltage, current, resistance, potentiometer, RTD, thermocouple, strain gage (full-, half-, and quarter-bridge configuration), IEPE ■ High-accuracy digitization 24-bit ADC, 100 kHz sample rate per channel ■ 2 Digital inputs or outputs Status, trigger, tare, alarm, command ■ Signal conditioning 16 virtual channels, linearization, digital filter, average, scaling, min/max storage, RMS, arithmetic, alarm ■ 3-Way galvanic isolation 500 VDC channel to channel, channel to power supply, and bank

Open the catalog to page 1

Gantner instruments Q.bloxx XL A101 Universal Measurement Module Technical DataAnalog Input Channels 1 according to EN 61326 2006: appendix B 2 according to EN 61326 2006: appendix A 3 noise pulses up to 1000 VDC continuous up to 250 VDC

Open the catalog to page 2

Gantner instruments Q.bloxx XL A101Universal Measurement Module Measurement Mode Current

Open the catalog to page 3

Gantner instruments Q.bloxx XL A101Universal Measurement Module Measurement Mode Thermocouple

Open the catalog to page 4

Gantner instruments Q.bloxx XL A101Universal Measurement Module Digital In-/Outputs

Open the catalog to page 5

Open the catalog to page 6

All Gantner Instruments catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list