*mydirectindustry

Q.bloxx XE A111

Product catalog summary

Overview
The Q.bloxx XE A111 is a high-performance measurement module designed for IEPE sensors and voltage measurements, part of the Q.series product family. It is ideal for distributed installations requiring high performance and custom sensor terminations, featuring integrated signal conditioning and arithmetic functions.

Key Features

EtherCAT DAQ solution with modular, DIN Rail mountable enclosures.
Measures up to 100 kHz per channel with low jitter for accurate synchronization.
Supports RS-485, 2-wire, EtherCAT (LVDS), FoE, and CoE protocols.
Electromagnetic compatibility according to EN61000-4 and EN55011.
Power supply range of 10 to 30 VDC.
Four galvanically isolated analog input channels for IEPE sensors and voltage.
Configurable input ranges: ±100 mV, ±1 VDC, ±10 VDC.
High-accuracy digitization with 24-bit ADC and 100 kHz sample rate per channel.
Signal conditioning includes virtual channels, linearization, digital filters, and more.
Galvanic isolation of 500 VDC channel to channel and to power supply.

Technical Data

Analog Input: 4 channels with typical accuracy of 0.01% and linearity error of 0.01% full-scale.
Measurement Mode Voltage: Input ranges with specific margin of error and resolution, high input impedance, and long-term stability.
Measurement Mode IEPE: Input ranges with specific margin of error and resolution, sensor excitation, and compliance voltage.
Analog/Digital Conversion: 24-bit resolution, 100 kHz sample rate, sigma-delta modulation, and various digital filters.
Communication Interface: EtherCAT with RS-485, 2-wire standard.
Power Supply: 10 to 30 VDC with overvoltage and overcurrent protection.
Environmental: Operating temperature from -20°C to +60°C, storage temperature from -40°C to +85°C, and relative humidity up to 95% at 50°C.
Mechanical Information: Made of aluminum and ABS, dimensions 30x145x135mm, weight approx. 500g.

Ordering Information
Article number: 508122

Catalog excerpts

Electromagnetic Compatibility according to EN61000-4 and EN55011 Power supply 10 ... 30 VDC and DIN rail mounting (EN60715) Q.bloxx XE is a new addition to the Q.series product family - the ideal EtherCAT DAQ solution for widely distributed installations that require higher performance and custom sensor terminations. Q.bloxx XE measurement modules possess integrated signal conditioning and arithmetic functions, packaged in modular, DIN Rail mountable enclosures that easily snap together for system expansion and are capable of measuring up to 100 kHz per channel with short cycle times and low jitter for accurate synchronization. ■ RS-485, 2-wire, EtherCAT (LVDS) ■ FoE (file access over EtherCAT, ETG.1000.5) and CoE (CAN over EtherCAT, ETG.50001.1) ■ Configurable PDO mapping to optimize the data throughput Key Features ■ 4 galvanic isolated analog input channels IEPE sensors, voltage ■ Configurable input ranges ±100 mV, ±1 VDC, ±10 VDC High-accuracy digitization 24-bit ADC, 100 kHz sample rate per channel ■ Signal conditioning 16 virtual channels, linearization, digital filter, average, scaling, min/max storage, RMS, arithmetic, alarm ■ Galvanic isolation 500 VDC channel to channel, channel to power supply, and bank

Open the catalog to page 1

Gantner instruments Q.bloxx XE A111 Measurement Module for IEPE Sensors and Voltages Technical DataAnalog Input Channels 1 according to EN 61326 2006: appendix B 2 according to EN 61326 2006: appendix A 3 noise pulses up to 1000 VDC continuous up to 250 VDC

Open the catalog to page 2

Gantner instruments Q.bloxx XE A111Measurement Module for IEPE Sensors and Voltages Measurement Mode IEPE

Open the catalog to page 3

Open the catalog to page 4

All Gantner Instruments catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list