*mydirectindustry

Catalogs
Gantner Instruments
Q.bloxx XE A111 BNC

Q.bloxx XE A111 BNC

Product catalog summary

Overview
The Q.bloxx XE A111 BNC is a high-performance measurement module designed for voltages and IEPE sensors, part of the Q.series product family. It is ideal for distributed installations requiring high performance and custom sensor terminations, featuring integrated signal conditioning and arithmetic functions.

Key Features

EtherCAT DAQ solution with modular, DIN Rail mountable enclosures.
Measures up to 100 kHz per channel with low jitter for accurate synchronization.
Supports RS-485, 2-wire, EtherCAT (LVDS), FoE, and CoE protocols.
Electromagnetic Compatibility according to EN61000-4 and EN55011.
Power supply range of 10 to 30 VDC.
4 galvanic isolated analog input channels for IEPE sensors and voltage.
High-accuracy digitization with 24-bit ADC and 100 kHz sample rate per channel.
Signal conditioning includes virtual channels, linearization, digital filter, averaging, scaling, min/max storage, RMS, arithmetic, and alarm.
Configurable input ranges: ±100 mV, ±1 VDC, ±10 VDC.
Galvanic isolation of 500 VDC channel to channel, channel to power supply, and bank.

Technical Data

Analog Input: 4 channels with typical accuracy of 0.01% and linearity error of 0.01% full-scale.
Voltage Measurement: Input ranges with specific margin of error and resolution, high input impedance, and long-term stability.
IEPE Measurement: Input ranges with specific margin of error and resolution, sensor excitation, and compliance voltage.
Analog to Digital Conversion: 24-bit resolution, 100 kHz sample rate, sigma-delta modulation, and anti-aliasing filter.
Communication Interface: EtherCAT with RS-485, 2-wire standard.
Input Power: 10 to 30 VDC with overvoltage and overcurrent protection.
Environmental Specifications: Operating temperature from -20°C to +60°C, storage temperature from -40°C to +85°C, and relative humidity of 5% to 95% at 50°C, non-condensing.

Mechanical Information

Material: Aluminum and ABS.
Dimensions: 30 x 145 x 135 mm.
Weight: Approximately 500 g.

Ordering Information

Article number: 508324.

Catalog excerpts

Gantner instruments Q.bloxx XE A111 BNCMeasurement Module for Voltages and IEPE Sensors Electromagnetic Compatibility according to EN61000-4 and EN55011 Power supply 10 ... 30 VDC and DIN rail mounting (EN60715) Q.bloxx XE is a new addition to the Q.series product family - the ideal EtherCAT DAQ solution for widely distributed installations that require higher performance and custom sensor terminations. Q.bloxx XE measurement modules possess integrated signal conditioning and arithmetic functions, packaged in modular, DIN Rail mountable enclosures that easily snap together for system expansion and are capable of measuring up to 100 kHz per channel with short cycle times and low jitter for accurate synchronization. ■ RS-485, 2-wire, EtherCAT (LVDS) ■ FoE (file access over EtherCAT, ETG.1000.5) and CoE (CAN over EtherCAT, ETG.50001.1) ■ Configurable PDO mapping to optimize the data throughput Key Features ■ 4 galvanic isolated analog input channels IEPE sensors, voltage ■ High-accuracy digitization 24-bit ADC, 100 kHz sample rate per channel Signal conditioning 16 virtual channels, linearization, digital filter, average, scaling, min/max storage, RMS, arithmetic, alarm ■ Configurable input ranges ±100 mV, ±1 VDC, ±10 VDC Galvanic isolation 500 VDC channel to channel, channel to power supply, and bank

Open the catalog to page 1

Gantner instruments Q.bloxx XE A111 BNC Measurement Module for Voltages and IEPE Sensors Technical DataAnalog Input Channels 1 according to EN 61326 2006: appendix B 2 according to EN 61326 2006: appendix A 3 noise pulses up to 1000 VDC, continuous up to 250 VDC

Open the catalog to page 2

Gantner instruments Q.bloxx XE A111 BNCMeasurement Module for Voltages and IEPE Sensors IEPE Measurement

Open the catalog to page 3

Open the catalog to page 4

All Gantner Instruments catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list