*mydirectindustry

Q.bloxx XE A108

Product catalog summary

Overview
The Q.bloxx XE A108 is a voltage measurement module that is part of the Q.series product family, designed for high-performance data acquisition in distributed installations. It features integrated signal conditioning and arithmetic functions, housed in modular, DIN Rail mountable enclosures.

Key Features

EtherCAT DAQ solution with up to 100 kHz measurement per channel.
Supports RS-485, 2-wire, EtherCAT (LVDS), FoE, and CoE protocols.
Configurable PDO mapping for optimized data throughput.
Electromagnetic compatibility according to EN61000-4 and EN55011.
Power supply range of 10 to 30 VDC.
8 analog input channels with differential voltage and current measurement capabilities.
2 digital inputs and outputs for status, trigger, tare, alarm, and command functions.
High-accuracy digitization with 24-bit ADC and 20 kHz sample rate per channel.
3-way galvanic isolation with 500 VDC channel to channel, power supply, and bus.

Technical Specifications

Analog Input: 8 channels with 0.01% typical accuracy and 0.05% in industrial areas.
Voltage Measurement: Input range of ±10 VDC with a resolution of 1.5 µV.
Current Measurement: Input range of ±25 mA with a resolution of 15 nA.
Digital I/Os: 4 channels with modes for status, tare, and reset.
Analog-to-Digital Conversion: 24-bit resolution with a 20 kHz sample rate per channel.
Communication Interface: EtherCAT with RS-485, 2-wire standard.
Environmental Specifications: Operating temperature from -20°C to +60°C, storage temperature from -40°C to +85°C, and relative humidity of 5-95% at 50°C.

Mechanical Information

Material: Aluminum and ABS.
Dimensions: 30 x 145 x 135 mm.
Weight: Approximately 500 g.

Ordering Information

Article number: 507727.
Accessories: Terminal SR, article number 791989.

Catalog excerpts

■ Electromagnetic Compatibility according to EN61000-4 and EN55011 ■ Power supply 10 ... 30 VDC and DIN rail mounting (EN60715) Q.bloxx XE is a new addition to the Q.series product family - the ideal EtherCAT DAQ solution for widely distributed installations that require higher performance and custom sensor terminations. Q.bloxx XE measurement modules possess integrated signal conditioning and arithmetic functions, packaged in modular, DIN Rail mountable enclosures that easily snap together for system expansion and are capable of measuring up to 100 kHz per channel with short cycle times and low jitter for accurate synchronization. ■ RS-485, 2-wire, EtherCAT (LVDS) ■ FoE (file access over EtherCAT, ETG.1000.5) and CoE (CAN over EtherCAT, ETG.50001.1) ■ Configurable PDO mapping to optimize the data throughput Key Features ■ 8 Analog input channels differential voltage, current (with shunt resistor) ■ 2 Digital inputs and outputs status, trigger, tare, alarm, command High-accuracy digitization 24-bit ADC, 20 kHz sample rate per channel ■ Signal conditioning linearization, filtering, average, scaling, min/max, RMS, arithmetic, alarm ■ 3-Way galvanic isolation 500 VDC channel to channel, channel to power supply, and channel to bus

Open the catalog to page 1

Gantner instruments Q.bloxx XE A108 Voltage Measurement Module Technical Data Analog Input

Open the catalog to page 2

Gantner instruments Q.bloxx XE A108Voltage Measurement Module Digital I/Os

Open the catalog to page 3

Open the catalog to page 4

All Gantner Instruments catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list