*mydirectindustry

Catalogs
Gantner Instruments
Q.bloxx XE A108-60V

Q.bloxx XE A108-60V

Product catalog summary

Overview
The Q.bloxx XE A108-60V is a multichannel module designed for voltage measurements, part of the Q.series product family. It is optimized for distributed installations requiring high performance and custom sensor terminations, featuring integrated signal conditioning and arithmetic functions.

Key Features

EtherCAT DAQ solution with RS-485, 2-wire communication.
Supports FoE and CoE protocols for data access and communication.
Configurable PDO mapping for optimized data throughput.
Electromagnetic compatibility compliant with EN61000-4 and EN55011.
Power supply range of 10 to 30 VDC, with DIN rail mounting capability.
8 galvanically isolated input channels with differential voltage measurement up to ±60 V.
High accuracy digitalization with 24-bit ADC and 20 kHz sample rate per channel.
Signal conditioning includes linearization, digital filtering, and arithmetic functions.

Technical Specifications

Analog Inputs: 8 channels, accuracy of 0.01% typical, input range of ±60 V, and isolation voltage of 500 VDC.
Digital In/Outputs: 4 channels (2 inputs, 2 outputs), with input voltage up to 30 VDC.
Analog/Digital Conversion: 24-bit resolution, 10 kHz update rate, and Sigma-Delta modulation.
Environmental: Operating temperature from -20°C to +60°C, storage temperature from -40°C to +85°C, and relative humidity up to 95% at 50°C.

Mechanical Information

Material: Aluminum and ABS.
Dimensions: 60 x 145 x 135 mm.
Weight: Approximately 700 g.

Ordering Information

Article number: 507929.

Additional Notes

Specifications are subject to change without notice.
A warm-up period of at least 45 minutes is required for specification validity.

Catalog excerpts

Gantner instruments Q.bloxx XE A108-60VMultichannel Module for Voltages Q.bloxx XE is a new addition to the Q.series product family - the ideal EtherCAT DAQ solution for widely distributed installations that require higher performance and custom sensor terminations. Q.bloxx XE measurement modules possess integrated signal conditioning and arithmetic functions, packaged in modular, DIN Rail mountable enclosures that easily snap together for system expansion and are capable of measuring up to 100 kHz per channel with short cycle times and low jitter for accurate synchronization. RS-485, 2-wire, EtherCAT (LVDS) FoE (file access over EtherCAT, ETG.1000.5) and CoE (CAN over EtherCAT, ETG.50001.1) Configurable PDO mapping to optimize the data throughput ■ Electromagnetic Compatibility according to EN61000-4 and EN55011 ■ Power supply 10 ... 30 VDC and DIN rail mounting (EN60715) Key Features ■ 8 galvanic isolated input channels differential voltage ±60 V, isolation voltage 500 VDC ■ High accuracy digitalization 24 bit ADC, 20 kHz sample rate per channel ■ 2 digital in and 2 digital outputs input: state, tare, memory reset, output: state, Alarm, threshold ■ Signal conditioning linearization, digital filter, average, scaling, min/max storage, RMS, arithmetic, alarm ■ Galvanic isolation channel to channel, power supply and interface, isolation voltage 500 VDC

Open the catalog to page 1

Gantner instruments Q.bloxx XE A108-60V Multichannel Module for Voltages Technical DataAnalog Inputs Channels 1 according to EN 61326 2006: appendix B 2 according to EN 61326 2006: appendix A 3 noise pulses up to 1000 VDC continuous up to 250 VDC

Open the catalog to page 2

Gantner instruments Q.bloxx XE A108-60VMultichannel Module for Voltages Digital In/Outputs Ordering Information Article number

Open the catalog to page 3

Open the catalog to page 4

All Gantner Instruments catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list