Electromagnetic Compatibility according to EN61000-4 and EN55011 Power supply 10 ... 30 VDC and DIN rail mounting (EN60715) Q.bloxx XE is a new addition to the Q.series product family - the ideal EtherCAT DAQ solution for widely distributed installations that require higher performance and custom sensor terminations. Q.bloxx XE measurement modules possess integrated signal conditioning and arithmetic functions, packaged in modular, DIN Rail mountable enclosures that easily snap together for system expansion and are capable of measuring up to 100 kHz per channel with short cycle times and low jitter for accurate synchronization. ■ RS-485, 2-wire, EtherCAT (LVDS) ■ FoE (file access over EtherCAT, ETG.1000.5) and CoE (CAN over EtherCAT, ETG.50001.1) ■ Configurable PDO mapping to optimize the data throughput Key Features ■ 2 galvanically isolated analog inputs channels strain gage and inductive half and full bridges, LVDT, RVDT quarter bridge with completion terminal ■ DC and carrier frequency (CF) principle 2.5 and 5 VDC excitation, 2.5 and 5 VDCeff excitation carrier frequency, 600 Hz or 4.8 kHz configurable per channel ■ 2 Analog output channels ±10 VDC, 20 kHz update rate per channel ■ High-accuracy digitization 24-bit ADC, 20 kHz sample rate per channel ■ 4 digital I/Os input: state, tare, memory reset, output: state, alarm, threshold Signal conditioning linearization, filtering, average, scaling, min/max, RMS, arithmetic, alarm ■ 3-Way galvanic isolation 500 VDC channel to channel, channel to power supply, and channel to bus

Gantner instruments Q.bloxx XE A106 Measurement Module for Strain Gage and LVDT/RVDT Technical DataAnalog Input Channels 1 according to EN 61326 2006: appendix B 2 according to EN 61326 2006: appendix A 3 noise pulses up to 1000 VDC, continuous up to 250 VDC

Gantner instruments Q.bloxx XE A106Measurement Module for Strain Gage and LVDT/RVDT Analog Output 1 low capacity sensor cable is strongly recommended

Gantner instruments Q.bloxx XE A106Measurement Module for Strain Gage and LVDT/RVDT LVDT/RVDT Measurement Validity of all listed specifications are subject to a warm-up period of at least 45 minutes Specifications subject to change without notice

Gantner instruments Q.bloxx XE A106Measurement Module for Strain Gage and LVDT/RVDTMechanical information Material [email protected] www.gantner-instruments.com Gantner Instruments Austria | Germany | France | Sweden | India | USA | China | Singapore MontafonerstraGe 4 ■ A-6780 Schruns ■ T +43 55 56 ■ 77 463-0