Gantner instruments Q.bloxx XE A104 TCKThermocouple and Low Voltage Measurement Module Electromagnetic Compatibility according to EN61000-4 and EN55011 Power supply 10 ... 30 VDC and DIN rail mounting (EN60715) Q.bloxx XE is a new addition to the Q.series product family - the ideal EtherCAT DAQ solution for widely distributed installations that require higher performance and custom sensor terminations. Q.bloxx XE measurement modules possess integrated signal conditioning and arithmetic functions, packaged in modular, DIN Rail mountable enclosures that easily snap together for system expansion and are capable of measuring up to 100 kHz per channel with short cycle times and low jitter for accurate synchronization. ■ RS-485, 2-wire, EtherCAT (LVDS) ■ FoE (file access over EtherCAT, ETG.1000.5) and CoE (CAN over EtherCAT, ETG.50001.1) ■ Configurable PDO mapping to optimize the data throughput Key Features ■ 8 analog input channels thermocouple (type B / E / J / K / L / N / R / S / T / U), voltage (±80 mV) ■ High-accuracy digitization 24-bit ADC, 100 Hz sample rate per channel, 50/60 Hz mains rejection ■ Automatic linearization correction optimal position of the interpolation points adjusted to the input range ■ Simplified wiring direct connectivity with mini-TC plugs, built-in cold junction compensation Open thermocouple detection detect broken wire, loose connection or thermocouple burnout ■ 3-Way galvanic isolation 100 VDC channel to channel, 500 VDC channel to power supply and bank ■ Electromagnetic compatibility (EMC) according to IEC 61000-4 and EN 55011

Gantner instruments Q.bloxx XE A104 TCK Thermocouple and Low Voltage Measurement Module Technical Data Analog Input Channels 1 according to EN 61326 2006: appendix B 2 according to EN 61326 2006: appendix A 3 noise pulses up to 1000 VDC, continuous up to 250 VDC Voltage Measurement

Gantner instruments Q.bloxx XE A104 TCKThermocouple and Low Voltage Measurement Module Thermocouple Measurement

Gantner instruments Remarks Validity of all listed specifications are subject to a warm-up period of at least 45 minutes Specifications subject to change without notice Mechanical information Material Ordering Information Article number Gantner Instruments Austria | Germany | France | Sweden | India | USA | China | Singapore MontafonerstraGe 4 ■ A-6780 Schruns ■ T +43 55 56 ■ 77 463-0 [email protected] www.gantner-instruments.com