*mydirectindustry

Q.bloxx XE A103

Product catalog summary

Overview: The Q.bloxx XE A103 is a multi-channel module designed for voltage measurements, part of the Q.series product family. It is optimized for distributed installations requiring high performance and custom sensor terminations, featuring integrated signal conditioning and arithmetic functions.

Key Features: The module supports EtherCAT communication, offers configurable PDO mapping, and complies with electromagnetic compatibility standards EN61000-4 and EN55011. It operates on a power supply of 10 to 30 VDC and is DIN rail mountable. It includes 8 galvanically isolated input channels with a 24-bit ADC and a sample rate of 100 Hz per channel.

Technical Specifications:

Analog Input: 8 channels with typical accuracy of 0.01% and isolation voltage of 500 VDC. The module supports voltage measurement with a range of ±10 V and current measurement with a range of ±25 mA (using Terminal SR).
Digital In-/Outputs: 2 digital inputs and 2 outputs, supporting functions like state, tare, and alarm.
Environmental Conditions: Operating temperature range is -20°C to +60°C, with storage temperatures from -40°C to +85°C. The module is designed to operate in relative humidity of 5% to 95% at 50°C, non-condensing.

Mechanical Information: The module is constructed from aluminum and ABS, measuring 30 x 145 x 135 mm and weighing approximately 500 g.

Ordering Information: The module's article number is 541119, with accessories available under article number 791989.

Catalog excerpts

Electromagnetic Compatibility according to EN61000-4 and EN55011 Power supply 10 ... 30 VDC and DIN rail mounting (EN60715) Q.bloxx XE is a new addition to the Q.series product family - the ideal EtherCAT DAQ solution for widely distributed installations that require higher performance and custom sensor terminations. Q.bloxx XE measurement modules possess integrated signal conditioning and arithmetic functions, packaged in modular, DIN Rail mountable enclosures that easily snap together for system expansion and are capable of measuring up to 100 kHz per channel with short cycle times and low jitter for accurate synchronization. ■ RS-485, 2-wire, EtherCAT (LVDS) ■ FoE (file access over EtherCAT, ETG.1000.5) and CoE (CAN over EtherCAT, ETG.50001.1) ■ Configurable PDO mapping to optimize the data throughput Key Features ■ 8 galvanic isolated input channels differential voltage, current via shunt connector Isolation voltage 100 VDC ■ High accuracy digitalization 24 bit ADC, 100 Hz sample rate per channel ■ 2 digital in and 2 outputs input: state, tare, memory reset output: state, alarm, threshhold Signal conditioning linearization, digital filter, average, scaling, min/max storage, arithmetic, alarm ■ Galvanic isolation channel to channel, isolation voltage 100VDC, power supply and interface, isolation voltage 500 VDC

Open the catalog to page 1

Gantner instruments Q.bloxx XE A103 Multi-Channel Module for Voltages Technical Data Analog Input

Open the catalog to page 2

Gantner instruments Q.bloxx XE A103Multi-Channel Module for Voltages Analog/Digital-Conversion

Open the catalog to page 3

Open the catalog to page 4

All Gantner Instruments catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list