Exhibit with us
*mydirectindustry  
English
  1. Catalogs
  2. GANN Mess- u. Regeltechnik GmbH
  3. MPP-5

MPP-5

MPP-5
1 / 1 PageView full catalog

MPP-5

Product catalog summary
Overview: The GANN HYDROMAT MPP-5 is a slave computer controller for timber drying kilns, similar to the Hydromat TK-MP 501 but without a touch-screen display. It requires the Hydromat MPC 4032 central computer for programming and data display.
Standard Equipment:
  • Separate amplifier box for remote installation in a control room.
  • Includes 8 wood moisture measuring points, and one EMC and temperature measuring point.
  • 5-meter cable for connection to the MPC 4032 central computer.
Optional Equipment:
  • Additional package for four more wood-moisture measuring points, allowing up to 16 total.
  • Equipment for reversing-type drying kilns with additional EMC and temperature measuring points.
  • Support for up to 16 wood temperature probes for ISPM-15 heat treatment compliance.
Technical Specifications:
  • Control cabinet dimensions: 250 mm height, 600 mm width, 250 mm depth; weight approximately 18 kg.
  • Signal amplifier box dimensions: 300 mm length, 200 mm width, 85 mm height.
Special Accessories:
  • Wireless measuring points are available for use with the Hydromat TK-MP 501 and MPP-5.
  • Two receivers should be installed diagonally inside the kiln for optimal operation.
  • Each wood moisture measuring point includes a transmitter and two stainless steel electrodes with teflon insulation in lengths of 15 mm, 25 mm, and 40 mm.
  • Each EMC and temperature measuring point includes a transmitter, an EMC electrode holder with wall connector, and a package of 50 EMC sensors.
See more

Catalog excerpts

MPP-5-1

With the exception of the missing touch-screen display, this slave computer controller is completely identical with the Hydromat TK-MP 501. Programming of the drying process and display of the drying data are only possible via the Hydromat MPC 4032 central computer. Standard Equipment • Separate amplifier box for easy installation of the controller away from the dryer in a control room. • 8 wood moisture measuring points and one each EMC and temperature measuring point in standard design. • Cable 5 m long for connection to the central computer MPC 4032. Optional Equipment • Package of four additional wood-moisture measuring points, up to totally 16 measuring points. • Equipment for reversing-type drying kilns, consisting of one each additional EMC and temperature measuring point. • Equipment for up to 16 wood temperature probes for heat treatment according to ISPM-15. Technical Specifications Control cabinet: Height: 250 mm, width: 600 mm, depth: 250 mm Weight: approx. 18 kg Signal amplifier box: Length: 300 mm, width: 200 mm, height: 85 mm Special Accessory for use with TK-MP501 and MPP5 Wireless measuring points can optionally be used with the Hydromat TK-MP 501 and MPP-5. Two receivers are to be installed diagonally inside the kiln to ensure flawless operation. One transmitter is required for each MC, EMC, and temperature measuring point. Each wood moisture measuring point consists of 1 transmitter and 2 stainless steel electrodes with teflon insulation 15 mm, 25 mm and 40 mm long. Each EMC and temperature measuring point consists of 1 transmitter, 1 EMC electrode holder with wall connector and one package of 50 EMC sensors. GANN Control Systems for Timber Drying Kilns 5/2009 7

 Open the catalog to page 1

All GANN Mess- u. Regeltechnik GmbH catalogs and technical brochures

  1. ELECTRONIC MOISTURE METERS
    ELECTRONIC MOISTURE METERS

    118  Pages

  2. BL COMPACT TF-IR 2
    BL COMPACT TF-IR 2

    1  Page

  3. Catalogue
    Catalogue

    112  Pages

  4. Catalogue_Electronic Moisture Meters 11.2014 V. 3.13
    Catalogue_Electronic Moisture Meters 11.2014 V. 3.13

    102  Pages

  5. MPC 4032
    MPC 4032

    1  Page

  6. TF 3
    TF 3

    1  Page

  7. TK-MP 101
    TK-MP 101

    1  Page

  8. TK-MP 301
    TK-MP 301

    1  Page

  9. TK-MP 501
    TK-MP 501

    2  Pages

  10. M 20-DS 16-i
    M 20-DS 16-i

    1  Page

  11. M19
    M19

    1  Page

  12. LB 71
    LB 71

    1  Page

  13. H 41
    H 41

    2  Pages

  14. DMT-8
    DMT-8

    2  Pages

  15. BL B 2
    BL B 2

    1  Page

  16. Cadenced measuring, recording and control system for continuous production processes
    Cadenced measuring, recording and control system for continuous production processes

    2  Pages

  17. Control systems for timber drying kilns
    Control systems for timber drying kilns

    8  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.