E4O14X65V12MD10

1 / 5 PagesView full catalog

E4O14X65V12MD10

Product catalog summary

Electrical Specifications

Port Information R1: Frequency ranges from 698-960 MHz with gains between 13.7 and 14.4 dBi. Azimuth beam width varies from 65° to 72°, and elevation beam width from 13.2° to 15°.
Port Information Y1/Y3: Frequency ranges from 1710-2690 MHz with gains between 13.9 and 15.1 dBi. Azimuth beam width ranges from 61° to 72°, and elevation beam width from 9° to 13°.
Port Information Y2/Y4: Similar frequency range as Y1/Y3 with slightly lower gains.
All ports have a front-to-back ratio greater than 22 dB and cross-polar discrimination at boresight greater than 17 dB.

General Specifications

Isolation is greater than 25 dB, VSWR is 1.5:1, and polarization is ±45°.
Intermodulation IM3 is -150 dBc, and impedance is 50 Ω.
Maximum effective power per port is 150 Watts.

Mechanical Specifications

Connector type is 10 x 4.3-10 Female, positioned at the bottom.
Mechanical downtilt ranges from 0° to 15°.
Antenna dimensions are 350 x 150 x 1600 mm, with a weight of 25 kg.
Max wind speed is 150 mph, and the radome color is gray.

Technical Specifications

Protocols compliant with AISG 2.0 / 3GPP.
Input voltage range is +10 ~ +30VDC, with power consumption less than 2W on standby and less than 13W when the motor is activated.
Temperature range is -40 to +70°C, with protection class IP65.
Adjustment cycles are up to 10,000 times, and the housing material is aluminum.

Features & Applications

Remote Electrical Tilting device supports multi/single antennas with electrical downtilt.
Firmware is updatable, and the device supports up to 5 channel antenna control.

Catalog excerpts

• 1 x Low + 4 x High Band Internal RET Panel Antenna • Electrical Down tilt : 2"-12" Horizontal Pattern Azimuth Beam width (°) 72 68 65 66 Cross Polar Discrimination at Boresight(dB) Vertical Pattern Elevation Beam width Electrical Downtilt continuously Adjustable First Upper Side Lobe Suppression (dB) Port Information Frequency Range Gain Horizontal Pattern Azimuth Beam width Front-to-Back Ratio Cross Polar Discrimination at Vertical Pattern Elevation Beam width Electrical Downtilt continuously Adjustable First Upper Side Lobe Suppression Copyright (c) 2019 GAMMA NU, INC. All rights reserved.

Open the catalog to page 1

Nomal 1 x Low + 4 x High Antenna (1x) 698-960 MHz (4x) 1710-2690 MHz ELECTRICAL SPECIFICATIONS Port Information Frequency Range Gain Bottom Azimuth Beam width Front-to-Back Ratio Cross Polar Discrimination at Boresight Elevation Beam width Electrical Downtilt continuously Adjustable First Upper Side Lobe Suppression GENERAL SPECIFICATIONS Isolation (dB) Max. Effective Power per Port (Watts) Array Frequency(MHz) Connectors Copyright (c) 2019 GAMMA NU, INC. All rights reserved.

Open the catalog to page 2

Omni Outdoor 1 x Low+ Canister 4 x High Antenna Antenna MECHANICAL SPECIFICATIONS Connector Type & Quan�ty Connector Posi�on Weight (with Moun�ng Kit) Max.Wind Speed (Survival Wind Speed) Radome (Color) ASA+PC (Gray) Remote Electrical Tilt (RET) Copyright (c) 2019 GAMMA NU, INC. All rights reserved.

Open the catalog to page 3

Internal RET (Remote Electrical Tilting device) Features & Applications • Remote Electrical Tilting device for Multi/Single antennas with electrical down-tilt • Firmware updatable & Flexibly change mode( Multi or Single ) • Compact size • Max. 5 channel antenna control supports (Motors for titling are included) Technical Specification Protocols Compliant to AISG 2.0 / 3GPP Input voltage range +10 ~ +30VDC (pin 6) Power consumption Connectors (AISG) Hardware interface (AISG) < 2W (stand by); < 13W (motor activated) According to AISG connect type : Male is input Female is output (Male/Female can...

Open the catalog to page 4