DOY16X65V12MD30TRI

1 / 6 PagesView full catalog

DOY16X65V12MD30TRI

Product catalog summary

Electrical Specifications

Frequency Range: The antenna operates across multiple frequency bands: 698-960 MHz, 1710-2690 MHz, and 3300-4200 MHz.
Gain: Maximum gain varies by frequency, with values such as 16.1 dBi for lower bands and up to 16.9 dBi for higher bands.
Beam Width: Horizontal azimuth beam width ranges from 61° to 75°, while vertical elevation beam width ranges from 6° to 11°.
Electrical Downtilt: Continuously adjustable from 2° to 12°.

General Specifications

Isolation: 25 dB, with interband isolation at 30 dB.
VSWR: 1.5:1, ensuring minimal signal reflection.
Polarization: ±45°.
Impedance: 50 Ω.
Max Power: 150 Watts per port.

Mechanical Specifications

Connector Type: 30 x 4.3-10 Female connectors positioned at the bottom.
Dimensions: Antenna measures Ø 14.5 x 78.7 inches.
Weight: Net weight is 119 lb, with a packed weight of 144.6 lb.
Wind Load: Can withstand wind speeds up to 150 mph.

Internal RET Features

Remote Electrical Tilting: Supports multi/single antennas with adjustable electrical downtilt.
Compliance: Adheres to AISG 2.0 / 3GPP standards.
Power Consumption: Less than 2W on standby, up to 13W when motor is activated.
Temperature Range: Operates between -40 to +70℃.

Catalog excerpts

• 4T4R Tri-Sector Antenna with Internal RET • Electrical Down tilt : 2"-12" ELECTRICAL SPECIFICATIONS | None Beamforming Port Information Frequency Range Gain Gain Horizontal Pattern Azimuth Beam width (°) Cross Polar Discrimination at Boresight Vertical Pattern Elevation Beam width Electrical Downtilt continuously Adjustable First Upper Side Lobe Suppression ELECTRICAL SPECIFICATIONS Port Information - Horizontal Pattern Azimuth Beam width (°) 70 67 Cross Polar Discrimination at Boresight (dB) 21 22 Vertical Pattern Elevation Beam width (°) 9 8 First Upper Side Lobe Suppression (dB) 18 20 Electrical Down tilt continuously APR, 2023 Copyright (c) 2023 GAMMA NU, INC. All rights reserved. 1

Open the catalog to page 1

4T4R LOW+MID+CBRS Tri-Sector 698-960 MHz 1710-2690 MHz 3300-4200 MHz 3 x (10-Port) 30-Port ELECTRICAL SPECIFICATION Port information - Horizontal Pattern Azimuth Beam width (°) Cross Polar Discrimination at Boresight Vertical Pattern Elevation Beam width (°) Electrical Downtilt continuously Adjustable First Upper Side Lobe Suppression (dB) GENERAL SPECIFICATIONS Max. Effective Power per Port (Watts) APR, 2023 Copyright (c) 2023 GAMMA NU, INC. All rights reserved. 2

Open the catalog to page 2

4T4R LOW+MID+CBRS Tri-SectorMECHANICAL SPECIFICATIONS 698-960 MHz 1710-2690 MHz 3300-4200 MHz Connector Type & Quantity Connector Position Antenna Dimension (D x H) Packaging Dimension (packed, W x H x D) Weight (Net) Weight (without Mounting Kit) Weight (Packed) Max.Wind Speed Radome (Color) Array Information Part# (inch / mm) www.gammanu.com APR, 2023 Copyright (c) 2023 GAMMA NU, INC. All rights reserved. 3

Open the catalog to page 3

Open the catalog to page 4

Internal RET (Remote Electrical Tilting device) Features & Applications • Remote Electrical Tilting device for Multi/Single antennas with electrical down-tilt • Firmware updatable & Flexibly change mode( Multi or Single ) • Compact size • 3 channel antenna control supports Technical Specification Input voltage range Power consumption Connectors (AISG) Hardware interface (AISG) Adjustment time (full range) Temperature range Protection class < 2W (stand by); < 13W (motor activated) 2 x 8 pin connector acc. to IEC 60130-9 Acc. to AISG Daisy chain in : male; Daisy chain out : female RS485A/B (pin5/pin3);...

Open the catalog to page 5

Thank vou for vour Consideration !

Open the catalog to page 6

DOY16X65V12MD30TRI

DOY16X65V12MD30TRI

Catalog excerpts

All GAMMA NU, INC catalogs and technical brochures