DO13X65V12D18TRI

1 / 5 PagesView full catalog

DO13X65V12D18TRI

Product catalog summary

Electrical Specifications

Port Information - R1: Frequency ranges from 698-960 MHz with gains between 12.5 to 13 dBi. Horizontal azimuth beam width varies from 73° to 76°, and vertical elevation beam width ranges from 17° to 21°.
Port Information - Y1-Y2: Frequency ranges from 1710-2690 MHz with gains between 14.2 to 15.1 dBi. Horizontal azimuth beam width varies from 66° to 71°, and vertical elevation beam width ranges from 9° to 12°.
Electrical down tilt is continuously adjustable from 2° to 12°.

General Specifications

Isolation is greater than 25 dB, and inter-band isolation is greater than 30 dB.
VSWR is 1.5:1, and polarization is ±45°.
Impedance is 50 Ω, with a maximum effective power per port of 250 Watts.

Mechanical Specifications

Connector type is 18 x 4.3-10 Female, positioned at the bottom.
Antenna dimensions are Ø 14.5 x 47.2 inches, and the weight without the mounting kit is 77.1 lbs.
Wind load at 100 mph is 400 N, with a maximum survival wind speed of 150 mph.

Remote Electrical Tilt (RET)

Internal RET is compliant with AISG 2.0 / 3GPP protocols.
Input voltage range is +10 ~ +30VDC, with power consumption less than 2W on standby.
Protection class is IP65, and the temperature range is -40 to +70℃.

Catalog excerpts

Low + Mid Tri-Sector with Internal RET 698-960 MHz 1710-2690 MHz •Tri-Sector with Internal RET antenna ELECTRICAL SPECIFICATIONS Port Information Frequency Range Gain (Mid Tilt) Horizontal Pattern Azimuth Beam width (°) Cross Polar Discrimination at Boresight (dB) Cross Polar Discrimination over sector (dB) Vertical Pattern Elevation Beam width (°) First Upper Side Lobe Suppression (dB) Electrical Down tilt continuously ELECTRICAL SPECIFICATIONS Port Information Frequency Range Gain (Mid Tilt) Horizontal Pattern Azimuth Beam width (°) Cross Polar Discrimination at Boresight (dB) Cross Polar Discrimination over sector (dB) Vertical Pattern Elevation Beam width First Upper Side Lobe Suppression Electrical Down tilt continuously adjustable The parameters Based on the NGMN P-Basta definition and recommendation. JUN, 2023 Copyright (c) 2023 GAMMA NU, INC. All rights reserved. 1

Open the catalog to page 1

Low + Mid Tri-Sector with Internal RET 698-960 MHz 1710-2690 MHz 3 x (6-Port) 18-Port GENERAL SPECIFICATIONS Inter Band Isolation (dB) Max. Effective Power per Port (Watts) Mechanical Dimensions Back side JUN, 2023 Copyright (c) 2023 GAMMA NU, INC. All rights reserved. 2

Open the catalog to page 2

Omni Outdoor Canister Antenna Low + Mid Tri-Sector with Internal RET MECHANICAL SPECIFICATIONS Connector Type & Quantity Connector Position Packaging Dimension (packed, W x H x D) Weight (without Mounting Kit) Weight (Packed) Max.Wind Speed (Survival Wind Speed) Radome (Color) Remote Electrical Tilt (RET) Array Information Sector No Copyright (c) 2023 GAMMA NU, INC. All rights reserved.

Open the catalog to page 3

Omni Outdoor Canister Antenna Low + Mid Tri-Sector with Internal RET Internal RET (Remote Electrical Tilting device) Features & Applications ·Remote Electrical Tilting device for Multi/Single antennas with electrical down-tilt ·Firmware updatable & Flexibly change mode( Multi or Single ) ·Compliant to AISG 2.0 / 3GPP ·Compact size Technical Specification Product Input voltage range Power consumption < 2W (stand by); < 13W (motor activated) Connectors (AISG) Hardware interface (AISG) Adjustment time (full range) Temperature range Protection class Adjustment Cycles Housing material 2x8Pin Connector...

Open the catalog to page 4

Thank vou for vour Consideration !

Open the catalog to page 5

DO13X65V12D18TRI

DO13X65V12D18TRI

Catalog excerpts

All GAMMA NU, INC catalogs and technical brochures