IdentiFlex 100
2Pages

Single Loop Addressable Fire Alarm Control Panel Description The IdentiFlex 100 is a 25 point, single loop, addressable fire alarm control panel that supports Gamewell-FCI, Velociti Series detectors and modules. The IdentiFlex 100 also features a powerful built-in, dual line fire communicator that offers communication for reporting of all system activity to a remote monitoring location. The IdentiFlex 100 provides you with the revolutionary value and performance of the addressable sensing technology combined with an exclusive, built-in digital communication that includes an easy-to-use interface. With the code wheel addressable detectors/modules and the JumpStart™ feature, the IdentiFlex 100 can be Life Safety operational without a single programming tool. Powerful features such as drift compensation and maintenance alert are delivered in this robust FACP from Gamewell-FCI. Installation The IdentiFlex 100 is a surface mount FACP. Compatibility The IdentiFlex 100 SLC supports the Velociti Series intelligent detectors and modules. Approvals The following list the NFPA Standard Approvals for the devices listed below: NFPA 13, NFPA 15, NFPA 16, NFPA 70, & NFPA 72: • Central Station • Auxiliary Protected Premises Unit • Remote Signalling • Local Protective Signaling Systems The above devices are suitable for automatic, manual, waterflow, sprinkler supervisory (DACT non-coded), signalling services. Features • Built-in support for a combination of up to 25 detectors and modules • Built-in digital communicator • Detectors and modules are code wheel addressed for a faster installation time • Offers drift compensation • Maintenance alert region • Point status eliminates calibrated smoke test requirements for NFPA 72 • Auto learn “JumpStart™” feature for easy programming • Custom programming can be performed through an FACP built-in browser. No programming software required • Uses standard wire–no shielded or twisted-pair required • Central Station reporting up to five zones • Built-in synchronization for AMSECO, Gentex®, Cooper-Wheelock®, or System Sensor® notification appliances • Two Style Y (Class B) notification appliance circuits (NAC) • Two built-in Form C programmable relays • Built-in Form C trouble relay • Provides SBUS for a connection to an optional GFANN-80 remote LCD annunciator JumpStart™ is a trademark of Honeywell International Inc. System Sensor is a registered trademark of Honeywell International Inc. ® Gentex is a registered trademark of Gentex. Cooper-Wheelock® is a registered trademark of Cooper-Wheelock Inc. ® UL is a registered trademark of Underwriters Laboratories Inc. GAMEWELL-FCI 12 Clintonville Road, Northford, CT 06472-1610 USA • Tel: (203) 484-7161 • Fax: (203) 484-7118 Specifications are for information only, are not intended for installation purposes, and are subject to change without notice. No responsibility is assumed by Gamewell-FCI for their use. www.gamewell-fci.com 9021-60579 Rev. C page 1 of 2 ©2012 by Honeywell International Inc. All rights reserved.

Signaling Line Circuit DNR duct detector Horn/ Strobe Notification Appliance Circuit Figure 1 IdentiFlex 100 Addressable FACP Overview Ordering Information Electrical GIF100 Primary AC: GIF100G Primary AC: Total Accessory Load: Notification Power: Standby Current: Alarm Current: Aux Power Circuits: Battery Charging Capacity: Battery Size: 120 VRMS @ 60 Hz,1.5A 230 VRMS @ 50/60, .75A Hz 2.0A @ 24 VDC 2.0A @ 24 VDC, power-limited 135 mA 220 mA 1.0A @ 24 VDC per circuit, power-limited 7.0 – 33 AH or 18 AH for ULC® installations 7 AH max. allowed in FACP cabinet. Larger capacity batteries can...