7100 Series
3Pages

Compact Analog Addressable Fire Alarm Control Panel The Gamewell-FCI, 7100 Series fire alarm control panel is a multi processor-based, analog addressable system. The control panel is a compact, yet expandable, platform. Intended for commercial, industrial and institutional installations, the 7100 Series is ideal for life safety and property protection fire alarm applications. The basic 7100 Series control panel provides one analog addressable Signaling Line Circuit (SLC), whether supports up to 99 analog addressable sensors, as well as supporting up to 98 addressable monitor modules and/or control points, totaling 197 addresses. The 7100 uses an advanced protocol that ensures an almost instant response to events while at the same time suppressing nuisance alarms. The system may be programmed with the CAMWorks™ programming utility tool or configured through a comprehensive set of intuitive, secure password-protected, frontpanel programming options. This important feature allows the system to quickly adapt to any future requirements due to changes in occupancies, building remodels, or other contingencies. The sophisticated circuitry and powerful analog software enables the 7100 Series fire alarm control panel to read the specific sensitivity level of each sensor and compensate for changes due to age, dust accumulation or other environmental factors. The 7100 incorporates the Gamewell-FCI Listed Integrated Sensitivity Testing (LIST) which meets NFPA 72 sensitivity testing and maintenance requirements. The LIST testing allows substantial savings in both maintenance and service while eliminating nuisance alarms. The Model 7100-1D features an integral Digital Alarm Communicator Transmitter (DACT) with all popular transmission formats and a 16-digit telephone number field. It is 8-digit Carrier Information Code (CIC) compliant and also prevents “dialer-runaway” in the event of intermittent system faults. The 7100-1D is UL Listed for Remote Station, Proprietary, and Central Station fire alarm systems. It allows ample space for wiring and room for batteries up to 12 A/H capacity. Listed under ANSI/UL® Standard 864 9th Edition. IBC Seismic Certified. 120 or 240 VAC (optional) input line voltage. Front panel programming with day/night sensitivity adjustments. 80-character alpha-numeric display. One Style 4 (Class “B”) signaling line circuit. Style 6 (Class “A”) with optional CAOM Module. Two Style Y (Class “B”) regulated notification appliance circuits rated for 1.5 amp each. Style Z (Class “A”) with optional CAOM Module. FM/UL® Listed for Pre-action/Deluge with optional MCOM Module. Periodic trouble reminder. Individual sensor drift compensation. Dual-stage maintenance alerts (“dirty” and “very dirty”). Multilevel sensor sensitivity adjustments (front panel programmable). Alarm verification per individual sensor. Positive alarm sequence for sensors or monitor modules. continued on the next page 6911-1703:0116 (Non-High Rise) Reference Certificate S1869 3003549 FDNY of Compliance COA #s 307-99-E 6911-1703:0118 (High Rise) 7300-1703:0106 (LCD-7100) VMA-45894-02C 307-99-E Vol. II (Revision 1) CAMWorks™ is a trademark of Honeywell International, Inc. Microsoft® Word® is a registered trademark of Microsoft® Corporation. UL® is a registered trademark of Underwriter’s Laboratories Inc. 12 Clintonville Road, Northford, CT 06472-1610 USA • Tel: (203) 484-7161 • Fax: (203) 484-7118 Specifications are for information only, are not intended for installation purposes, and are subject to change without notice. No responsibility is assumed by Gamewell-FCI for their use. www.gamewell-fci.com 9020-0466 Rev. N page 1 of 3 ©2015 by Honeywell International Inc. All rights reserved.

Optional Accessories Features (Continued) LCD-7100 The LCD-7100 remote serial display offers an 80-character alphanumeric readout for the remote display of all system events. It duplicates all the information on the 7100 Series panel display and provides key switch protected functions such as System Reset, Alarm Acknowledge, Trouble Acknowledge, Signal Silence, and Drill Test. LEDs on the LCD-7100 indicate Alarm, Supervisory, System Trouble, Power Fault, Systems Silenced, NAC#1, and NAC#2 Silenced conditions. The LCD-7100 can be surface or semi-flush mounted on a standard four-gang...

Ordering Information Ordering Information (Continued) Replacement Parts Description 7100 Addressable FACP, 1 SLC mounted in the 7100-CAB enclosure, red 7100 Addressable FACP w/DACT, One SLC mounted in 7100-CAB enclosure, red Description Replacement board for 7100-1 Replacement board for 7100-1D Replacement board for 7100-2 Replacement board for 7100-2D Seismic Battery Bracket Kits 90516 Remote Serial Annunciator, LCD Display (80-character). Dimensions: 4.25” H x 8.25” W x 1.90” (43 H x 37 W x 7.7 D cm) RAN-7100 Remote Series Annunciator, LCD Display (80-character). Dimensions: 10” W x 5...