Temperature control Probes Waterproof probe with a PT100 sensor (100 ohms,0°c class B). Connection to the sensor by 2 or 3 insulated wires in a special fluoropolymer insulated cable. Thermocouple probe type J thermocouple wire insulated with a fluoropolymer sleeving. The hot junction tip is protected by a fluoropolymer shrink tube. Flexible probe & probe mounted on heater Type SFlexible probe coated with fluoropolymer To install on a rigid support Standard length 1,5m The flexible fluoropolymer coated probe can go through the same cable-gland as the one of the heater. Fluoropolymer coated probe mounted on a PP or PVDF rigid bendeable frame. probe type Materials code for code for assembly type support materials flexible length rigid length SOPT2 = PT 100 2 leads F = PFA SOPT3 = PT 100 3 leads SOTCJ = Thermocouple J = flexible on heater 1 = stainless steel rigid 2 = flexible = without assembly = PVDF = PP GALVATEK S.A.S - 9, rue de la lour du Mesnil-Renard - 78270 Bonnieres, France gffH www.galvatek.com - Tel. 01 30 93 07 57 - [email protected]