![Galvatek - logo](https://img.directindustry.com/images_di/logo-p/L16825.gif)
Catalog excerpts
![Galvatherm® - keeping from freezing storage tanks - 1](https://img.directindustry.com/pdf/repository_di/16825/galvatherm-keeping-from-freezing-storage-tanks-970504_1m.jpg)
Flat heaters type F, for fost protection With options Feet & Cable-gland these models are specifically adapted to keep liquid storage tanks from freezing, all sizes with or without double wall. Installation through the inspection trap (ø 500 mm minimum). Can be installed in a tank filled when support feet are ordered on each side of the heating part. Can be passed through the inspection trap without interfering with the tank. For a complete efficiency we recommend a cable-gland installed on the non heating part N - positioning hole ø 75 mm to be planned on the dome - and a FEP Teflon® coated PT100 probe mounted on heater. Assembly type A : particularly suitable up to 6 kW Assembly type F: ideal for important powers Length H corresponds to the installation height of the cable-gland on the N part. To ensure a proper positioning and avoid any mechanical damage of the cable, please allow an extra 300 mm on the H length. Other options The Galvatherm heater is only planned to heat liquids. Probe mounted on heater Feet (standard 100 mm) PP, PVDF or stainless steel for installation at fthe bottom Ref in PP : PIPP Ref in PVDF : PIPF Ref in stainless steel : PIIN (additional ballast possible) Réf en PVDF : PIPF Teflon®coated PT100 probe 2,3 or 4 wires, installed at the factory. Closed tank : the probe goes through the same cablegland as the one of the heater. Fixed by PP or Tefzel clamps Ref : contact us GALVATEK S.A.S - 9, rue de la Tour du Mesnil-Renard - 78270 Bonnières, France www.galvatek.com - Tél. 01 30 93 07 57 Fax. 01 30 93 25 04 - info@galvatek.fr
Open the catalog to page 1![Galvatherm® - keeping from freezing storage tanks - 2](https://img.directindustry.com/pdf/repository_di/16825/galvatherm-keeping-from-freezing-storage-tanks-970504_2m.jpg)
Flat heaters A&F, codification Construction of the reference number P30 thickness code power code voltage code exit code cable code assembly code materials code J = petit côté K = grand côté Cable code details F = FEP single layer 1 W/cm2 G = FEP double layer 1 W/cm2 P = PFA single layer 1 W/cm2 D = PFA double layer 1 W/cm2 Assembly code details A = coated frame F = with a rod frame H = for rod frame Support materials code code other pieces PVDF PP PVDF PP PVDF PP - stainless steel applicable to assembly types : GALVATEK S.A.S - 9, rue de la Tour du Mesnil-Renard - 78270 Bonnières, France...
Open the catalog to page 2All Galvatek catalogs and technical brochures
-
Float Switches - MTS
2 Pages
-
General Product brochure
8 Pages
-
Rotkappe BC
2 Pages
-
Temperature limiter - ETB200
1 Pages
-
MINIBOX - 2M02
1 Pages
-
BC and BC/L
2 Pages
-
ROTKAPPE ABS
2 Pages
-
PTFE Rod Heaters GALMAFORM
2 Pages
-
BASE HEATER - 560401
1 Pages
-
Temperature control probes
1 Pages
-
control box
2 Pages
-
Control-Therm Type T
1 Pages
-
Control-Therm Type U
1 Pages
-
Conductive level probe
2 Pages
-
CALOR heating cartridges
2 Pages
-
Rotkappe LC
2 Pages