Flat heaters type F, for frost protection With options Feet & Cable-gland these models are specifically adapted to keep liquid storage tanks from freezing, all sizes with or without double wall. Installation through the inspection trap (ø 500 mm minimum). Can be installed in a tank filled when support feet are ordered on each side of the heating part. Can be passed through the inspection trap without interfering with the tank. For a complete efficiency we recommend a cable-gland installed on the non heating part N - positioning hole ø 75 mm to be planned on the dome - and a PFA coated PT100 probe mounted on heater. Assembly type A : particularly suitable up to 6 kW Assembly type F: ideal for important powers Length H corresponds to the installation height of the cable-gland on the N part. To ensure a proper positioning and avoid any mechanical damage of the cable, please allow an extra 300 mm on the H length. Other options The Galvatherm heater is only planned to heat liquids. Feet on each side Probe mounted on heater Feet (standard 100 mm) PP, PVDF or stainless steel for installation at fthe bottom Ref in PP : PIPP Ref in PVDF : PIPF Ref in stainless steel : PIIN (additional ballast possible) Réf en PVDF : PIPF PFA coated PT100 probe 2,3 or 4 wires, installed at the factory. Closed tank : the probe goes through the same cablegland as the one of the heater. Fixed by PP or Tefzel clamps Ref : contact us GALVATEK S.A.S - 9, rue de la Tour du Mesnil-Renard - 78270 Bonnières, France www.galvatek.com - Tél. 01 30 93 07 57 - info@galvatek

Flat heaters A&F, codification m.a.j 03/06/2026 thickness J x K power code code code voltage code exit cable code code N length C length assembly materials code code code code P30 04 J = petit cote K = grand cote Cable code detailsP = PFA single layer 1 W/cm2 D = PFA double layer 1 W/cm2 A = coated frame F = with a rod frame H = for rod frame code frame strips1 = PVDF PVDF2 = PP PP 3 = PFA PFA other applicable to pieces assembly types PVDF A F GALVATEK S.A.S - 9, rue de la Tour du Mesnil-Renard - 78270 Bonnieres, France www.galvatek.com - Tel. 01 30 93 07 57 - [email protected]