Galvatherm - Flat immersion heater - Type D
4Pages

{{requestButtons}}

Catalog excerpts

Galvatherm - Flat immersion heater - Type D - 1

Flat heaters type D The Galvatherm heaters are specially designed with a cable that only heats the part that is to be continually immersed. The cable is composed of a heating resistance insulated with thermal and electric components on which is coextruded a Teflon® sheath insuring a reliable chemical resistance. The cable is rolled up according dimensions & shapes proposed and held with PVDF, PP or FEP strips which ensure the right distance between the rolls. To secure completely the heating part it is then mounted on a flexible structure in PVDF, PP or FEP. Electric safety : the Galvatherm heater complies with protection class 1 of EN 60519-1/2. The cable is screened throughout the entire length by a copper earthing strip. The earthing must be connected to the earth. In order to provide maximum safety, a fault-current (FI) protection device (30mA) should be used.. (small side) (large side) Assembly type convenient for immersion heaters with reference P30 (thickness 30 mm) , P40 (thickness 40 mm) , P90 (thickness 100 mm) On a plastic strip structure PVDF, PP or FEP Options and Accessories Extra length of cables Electrical connecting cable C of type H05 VV-F (PVC) or H07 RN-F (Neopren) Non heating cable N to go out of the tank Removable guard Perforated plastic guard PP ou PVDF Ref in PP : PRPPP Ref in PVDF : PRPPF Cable-gland Ø75 mm Standard height 50 mm Other heights possible For installation at the bottom Ref in PP : PIPP Ref in PVDF : PIPF Ref in PTFE : PIPTFE Allow between 200 to 300 mm extra on the H length (H=installation height on N) Ref in PP : PEPP Ref in PVDF : PEPF GALVATEK S.A.S - 9, rue de la Tour du Mesnil-Renard - 78270 Bonnières, France www.galvatek.com - Tél. 01 30 93 07 57 Fax. 01 30 93 25 04 - info@galvatek.fr The Galvatherm heater is only planned to heat liquid

Open the catalog to page 1
Galvatherm - Flat immersion heater - Type D - 2

The table below informs on the dimensions of the heating part and its references. The reference number begins by P30, P40 or P90. These codes indicate the thickness 's device. P30 = thickness 30 mm / P40 = 40 mm / P90 = 100 mm All dimensions are given with a tolerance of ± 10 mm. Standard cable coating : FEP single layer. For other coatings please contact us. SINGLE-PHASE IMMERSION HEATERS KW J x K 230V sg-ph KW J x K 230V sg-ph 0.5 kW List of other single-phase voltages available • 110V single-phase : 0.5 kW, 1 kW, 1.5 kW, 2 kW • 460V single-phase : 1 kW, 1.5 kW, 2 kW, 3 kW, 4...

Open the catalog to page 2
Galvatherm - Flat immersion heater - Type D - 3

For the construction of the reference, see following page. Attention P90 type D : Add 25 mm on J and K to the dimensions written * If feet option : 6 feet required instead of 4 Other voltage available : 460V three-phases : 3 kW, 4.5 kW, 6 kW, 9 kW, 12 kW, 15 kW GALVATEK S.A.S - 9, rue de la Tour du Mesnil-Renard - 78270 Bonnieres, France www.galvatek.com - Tel. 01 30 93 07 57 Fax. 01 30 93 25 04 - info@galvatek.fr update 04/09/2014

Open the catalog to page 3
Galvatherm - Flat immersion heater - Type D - 4

Flat heaters, codificationConstruction of the reference number P30 03 05 2 J F 0 0 D 1 thickness J x K power code code code voltage code exit code cable code code code code J = small side K= large side Cable code details F = FEP single layer 1 W/cm2 G = FEP double layer 1 W/cm2 P = PFA single layer 1 W/cm2 D = PFA double layer 1 W/cm2 D = strip frame + perp. code frame PVDF PP FEP FEP FEP PVDF PP PVDF PP FEP FEP FEP FEP FEP other pieces PVDF PP PVDF PP PVDF PP GALVATEK S.A.S - 9, rue de la Tour du Mesnil-Renard - 78270 Bonnieres, France...

Open the catalog to page 4

All Galvatek catalogs and technical brochures

  1. Rotkappe BC

    2 Pages

  2. BC and BC/L

    2 Pages

  3. ROTKAPPE ABS

    2 Pages

  4. control box

    2 Pages

  5. Rotkappe LC

    2 Pages