Catalogs >
Galvatek >
Galvatherm - Flat immersion heater - Type B

Galvatherm - Flat immersion heater - Type B
4Pages

Catalog excerpts

Galvatherm - Flat immersion heater - Type B - 1

The cable is rolled up according dimensions & shapes proposed and held with PVDF, PP or FEP strips which ensure the right distance between the rolls. To secure completely the heating part it is then mounted on a metallic frame coated with PVDF, PP or FEP or on a stainless steel frame. Electric safety : the Galvatherm heater complies with protection class 1 of EN 60519-1/2. The cable is screened throughout the entire length by a copper earthing strip. The earthing must be connected to the earth. In order to provide maximum safety, a fault-current (FI) protection device (30mA) should be used. exit on K (large side) Assembly type convenient for immersion heaters with reference On metallic frame coated PP, PVDF, FEP or stainless steel frame Recommended up to 6 kW 65 Extra length of cables Electrical connecting cable C of type H05 VV-F (PVC) or H07 RN-F (Neopren) Non heating cable N to go out of the tank sg-ph FIXING BRACKET exit on J (small side) P30 (thickness 30 mm) , P40 (thickness 40 mm) , P90 (thickness The Galvatherm heater is only planned to heat liquids. Removable guard Perforated plastic guard PP ou PVDF Ref in PP : PRPPP Ref in PVDF : PRPPF Ref in PP : PEPP Ref in PVDF : PEPF GALVATEK S.A.S - 9, rue de la Tour du Mesnil-Renard - 78270 Bonnières, France www.galvatek.com - Tél. 01 30 93 07 57 Fax. 01 30 93 25 04 - info@galvatek.fr Allow between 200 to 300 mm extra on the H length (H=installation height on

Open the catalog to page 1

Galvatherm - Flat immersion heater - Type B - 2

The table below informs on the dimensions of the heating part and its references. The reference number begins by P30, P40 or P90. These codes indicate the thickness 's device. P30 = thickness 30 mm / P40 = 40 mm / P90 = 100 mm All dimensions are given with a tolerance of ± 10 mm. Standard cable coating : FEP single layer. For other coatings please contact us. SINGLE-PHASE IMMERSION HEATERS KW J x K 230V sg-ph KW J x K 230V sg-ph 0.5 kW List of other single-phase voltages available • 110V single-phase : 0.5 kW, 1 kW, 1.5 kW, 2 kW • 460V single-phase : 1 kW, 1.5 kW, 2 kW, 3 kW, 4...

Open the catalog to page 2

Galvatherm - Flat immersion heater - Type B - 3

— For the construction of the reference, see following page. Other voltage available : 460V three-phases : 3 kW, 4.5 kW, 6 kW, 9 kW, 12 kW, 15 kW _ GALVATEK S.A.S - 9, rue de la Tour du Mesnil-Renard - 78270 Bonnieres, France www.galvatek.com - Tel. 01 30 93 07 57 Fax. 01 30 93 25 04 - info@galvatek.fr update 04/09/2014

Open the catalog to page 3

Galvatherm - Flat immersion heater - Type B - 4

Flat heaters, codificationConstruction of the reference number P30 03 05 2 J F 0 0 B 1 thickness J x K power code code code voltage code exit code cable code code code code J = small side K= large side Cable code details F = FEP single layer 1 W/cm2 G = FEP double layer 1 W/cm2 P = PFA single layer 1 W/cm2 D = PFA double layer 1 W/cm2 B = coated frame with fixing bracket code frame PVDF PP FEP FEP PVDF PP stainless steel PVDF PP FEP FEP FEP FEP FEP other pieces PVDF PP PVDF PP PVDF PP PP GALVATEK S.A.S - 9, rue de la Tour du Mesnil-Renard - 78270...

Open the catalog to page 4

Galvatherm - Flat immersion heater - Type B 4Pages

Catalog excerpts

All Galvatek catalogs and technical brochures

Galvatherm - Flat immersion heater - Type B
4Pages