The cable is rolled up according dimensions & shapes proposed and held with PVDF, PP or PFA strips which ensure the right distance between the rolls. To secure completely the heating part it is then mounted on a metallic frame coated with PVDF, PP or PFA or on a stainless steel frame. Electric safety : the Galvatherm heater complies with protection class 1 of EN 60519-1/2. The cable is screened throughout the entire length by a copper earthing strip. The earthing must be connected to the earth. In order to provide maximum safety, a fault-current (FI) protection device (30mA) should be used. exit on K (large side) Assembly type convenient for immersion heaters with reference Maximum X length = 1600 mm On metallic frame coated PP, PVDF, PFA or stainless steel frame Recommended up to 6 kW 65 25 sg-ph FIXING BRACKET Options and Accessories Extra length of cables Electrical connecting cable C of type H05 VV-F (PVC) or H07 RN-F (Neopren) Non heating cable N to go out of the tank exit on J (small side) P30 (thickness 30 mm) , P40 (thickness 40 mm) , P90 (thickness The Galvatherm heater is only planned to heat liquids. Removable guard Perforated plastic guard PP ou PVDF Ref in PP : PRPPP Ref in PVDF : PRPPF Cable-gland Ø75 mm Allow between 200 to 300 mm extra on the H length (H=installation height on N) Ref in PP : PEPP Ref in PVDF : PEPF GALVATEK S.A.S - 9, rue de la Tour du Mesnil-Renard - 78270 Bonnières, France www.galvatek.com - Tél. 01 30 93 07 57 - info@galvatek

The table below informs on the dimensions of the heating part and its references. The reference number begins by P30, P40 or P90. These codes indicate the thickness 's device. P30 = thickness 30 mm / P40 = 40 mm / P90 = 100 mm All dimensions are given with a tolerance of ± 10 mm. Standard cable coating : PFA single layer. Double layer please contact us. GALVATEK S.A.S - 9, rue de la Tour du Mesnil-Renard - 78270 Bonnieres, France www.galvatek.com - Tel. 01 30 93 07 57 - [email protected]

THREE-PHASES IMMERSION HEATERS KW J x K 230V 3-ph 400V 3-ph KW J x K 230V 3-ph 400V 3-ph 1.5 kW For the construction of the reference, see following page. Other voltage available : GALVATEK S.A.S - 9, rue de la Tour du Mesnil-Renard - 78270 Bonnieres, France www.galvatek.com - Tel. 01 30 93 07 57 - [email protected]

Construction of the reference numberP30 04 05 2 J P 0 0 B 1 thickness J x K power code code code exit cable code code N length C length assembly materials code code code code J = small side K = large side Cable code detailsP = PFA single layer 1 W/cm2D = PFA double layer 1 W/cm2Detail du code montageB = coated frame with fixing bracketSupport materials code code frame strips other pieces PVDF PPPVDF PPPVDF PP PP GALVATEK S.A.S - 9, rue de la Tour du Mesnil-Renard - 78270 Bonnieres, France www.galvatek.com - Tel. 01 30 93 07 57 - [email protected]