Flat heaters type A Models adapted to all classical tank configurations and offering a large exchange surface in a minimum bulk. Installation on the side or at the bottom The Galvatherm heaters are specially designed with a cable that only heats the part that is to be continually immersed. The cable is composed of a heating resistance insulated with thermal and electric components on which is co-extruded a PFA sheath insuring a reliable chemical resistance. The cable is rolled up according dimensions & shapes proposed and held with PVDF, PP or PFA strips which ensure the right distance between the rolls. To secure completely the heating part it is then mounted on a metallic frame coated with PVDF, PP or PFA or on a stainless steel frame. (small side) (large side) Assembly type convenient for immersion heaters with reference Electric safety : the Galvatherm heater complies with protection class 1 of EN 60519-1/2. The cable is screened throughout the entire length by a copper earthing strip. The earthing must be connected to the earth. In order to provide maximum safety, a fault-current (FI) protection device (30mA) should be used. . P30 (thickness 30 mm) , P40 (thickness 40 mm) , P90 (thickness 100 mm) On metallic frame coated PP, PVDF, PFA or stainless steel frame Recommended up to 6 kW Options and Accessories Extra length of cables Electrical connecting cable C of type H05 VV-F (PVC) or H07 RN-F (Neopren) Non heating cable N to go out of the tank The Galvatherm heater is only planned to heat liquids. Removable guard Perforated plastic guard PP ou PVDF Ref in PP : PRPPP Ref in PVDF : PRPPF Feet for type A Standard height 50 mm Other heights possible For installation at the bottom of the tank. Ref in PP : PIPP Ref in PVDF : PIPF Ref in PTFE : PIPTFE Ref in inox : PIIN Allow between 200 to 300 mm extra on the H length (H=installation height on N) Ref in PP : PEPP Ref in PVDF : PEPF GALVATEK S.A.S - 9, rue de la Tour du Mesnil-Renard - 78270 Bonnières, France www.galvatek.com - Tél. 01 30 93 07 57 - [email protected]

The table below informs on the dimensions of the heating part and its references. The reference number begins by P30, P40 or P90. These codes indicate the thickness 's device. P30 = thickness 30 mm / P40 = 40 mm / P90 = 100 mm All dimensions are given with a tolerance of ± 10 mm. Standard cable coating : PFA single layer. Double layer please contact us. GALVATEK S.A.S - 9, rue de la Tour du Mesnil-Renard - 78270 Bonnieres, France www.galvatek.com - Tel. 01 30 93 07 57 - [email protected]

THREE-PHASES IMMERSION HEATERS KW J x K 230V 3-ph 400V 3-ph KW J x K 230V 3-ph 400V 3-ph 1.5 kW For the construction of the reference, see following page. * If feet option : 6 feet required instead of 4 Other voltage available : GALVATEK S.A.S - 9, rue de la Tour du Mesnil-Renard - 78270 Bonnieres, France www.galvatek.com - Tel. 01 30 93 07 57 - [email protected]

Construction of the reference numberP30 04 05 2 J P 0 0 A 1 thickness J x K power code code code exit cable code code N length C length assembly materials code code code code J = small side K = large side Cable code detailsP = PFA single layer 1 W/cm2 D = PFA double layer 1 W/cm2 code frame strips other pieces GALVATEK S.A.S - 9, rue de la Tour du Mesnil-Renard - 78270 Bonnieres, France www.galvatek.com - Tel. 01 30 93 07 57 - [email protected]