Website:
Galvatek
Catalog excerpts
Cylindrical heaters, type S Models adapted to all classical tank configurations and offering a large exchange surface in a minimum bulk. Installation on the side or at the bottom The Galvatherm heaters are specially designed with a cable that only heats the part that is to be continually immersed. The cable is composed of a heating resistance insulated with thermal and electric components on which is co-extruded a Teflon® sheath insuring a reliable chemical resistance.. The cable is rolled up according dimensions & shapes proposed and held with PVDF or PP strips which ensure the right distance between the rolls. Assembly type convenient for immersion heaters with diameter Electric safety : the Galvatherm heater complies with protection class 1 of EN 60519-1/2. The cable is screened throughout the entire length by a copper earthing strip. The earthing must be connected to the earth. In order to provide maximum safety, a fault-current (FI) protection device (30mA) should be used. Structure materials in PP or PVDF Options and Accessories Extra length of cables The Galvatherm heater is only planned to heat liquids. Removable guard Electrical connecting cable C of type H05 VV-F (PVC) or H07 RN-F (Neopren) Perforated plastic guard in PP only For C85 and C12 models Non heating cable N to go out of the tank Cable-gland Ø75 mm Allow between 200 to 300 mm extra on the H length (H=installation height on N) Ref in PP : PICPP Ref in PVDF : PICPF Ref in PP : PEPP Ref in PVDF : PEPF GALVATEK S.A.S - 9, rue de la Tour du Mesnil-Renard - 78270 Bonnières, France www.galvatek.com - Tél. 01 30 93 07 57 Fax. 01 30 93 25 04 - info@galvatek.fr Standard height 35 mm For installation at the bottom of the tank For C85 et C12 mode
Open the catalog to page 1
Cylindrical heaters, type S Single-phase Three-phases 0D = outside diameter A = overall length of the heating part All dimensions are given ± 10 mm Other voltages available : • 110V single-phase : from 0.5 kW to 2 kW • 460V single-phase : from 1 kW to 6 kW • 460V three-phases : from 3 kW to 15 kW • Standard cable coating in FEP single layer. Other coatings, please contact us for the choice. For the construction of the reference, see following page. GALVATEK S.A.S - 9, rue de la Tour du Mesnil-Renard - 78270 Bonnieres, France www.galvatek.com - Tel. 01 30 93 07 57 Fax. 01 30 93 25 04 -...
Open the catalog to page 2
diametre code code code voltage code cable code N length C length assembly materials code code code code Cable code details F = FEP single layer 1 W/cm2 G = FEP double layer 1 W/cm2 P = PFA single layer 1 W/cm2 D = PFA double layer 1 W/cm2 strips PVDF PP other pieces PVDF PP GALVATEK S.A.S - 9, rue de la Tour du Mesnil-Renard - 78270 Bonnieres, France www.galvatek.com - Tel. 01 30 93 07 57 Fax. 01 30 93 25 04 - info@galvatek.fr
Open the catalog to page 3All Galvatek catalogs and technical brochures
-
Float Switches - MTS2 Pages
-
General Product brochure8 Pages
-
Rotkappe BC2 Pages
-
Temperature limiter - ETB2001 Pages
-
MINIBOX - 2M021 Pages
-
BC and BC/L2 Pages
-
ROTKAPPE ABS2 Pages
-
PTFE Rod Heaters GALMAFORM2 Pages
-
BASE HEATER - 5604011 Pages
-
Temperature control probes1 Pages
-
control box2 Pages
-
Control-Therm Type T1 Pages
-
Control-Therm Type U1 Pages
-
Conductive level probe2 Pages
-
CALOR heating cartridges2 Pages
-
Rotkappe LC2 Pages
