Cylindrical heaters, type R Models adapted to all classical tank configurations and offering a large exchange surface in a minimum bulk. The Galvatherm heaters are specially designed with a cable that only heats the part that is to be continually immersed. The cable is composed of a heating resistance insulated with thermal and electric components on which is co-extruded a PFA sheath insuring a reliable chemical resistance.. The cable is rolled up according dimensions & shapes proposed and held with PVDF or PP strips which ensure the right distance between the rolls. To secure completely the heating part it is then mounted on a plastic rod in PVDF or PP. Assembly type convenient for immersion heaters with diameter 85 mm and 120 mm A = heating part Electric safety : the Galvatherm heater complies with protection class 1 of EN 60519-1/2. The cable is screened throughout the entire length by a copper earthing strip. The earthing must be connected to the earth. In order to provide maximum safety, a fault-current (FI) protection device (30mA) should be used. Options and Accessories Extra length of cables X = overal height The X length cannot exceed 1800 mm On a plastic rod structure (ø 20 mm) in PP or PVDF The Galvatherm heater is only planned to heat liquids. Removable guard Electrical connecting cable C of type H05 VV-F (PVC) or H07 RN-F (Neopren) Perforated plastic guard in PP only For C85 and C12 models Non heating cable N to go out of the tank Cable-gland Ø75 mm Allow between 200 to 300 mm extra on the H length (H=installation height on N) Ref in PP : PEPP Ref in PVDF : PEPF GALVATEK S.A.S - 9, rue de la Tour du Mesnil-Renard - 78270 Bonnières, France www.galvatek.com - Tél. 01 30 93 07 57 - info@galvatek.

Cylindrical heaters, type R Galvatherm® 0D = outside diameter A = overall length of the heating part All dimensions are given ± 10 mm Other voltages available : • 110V single-phase : from 0.5 kW to 2 kW • 460V single-phase : from 1 kW to 6 kW • 460V three-phases : from 3 kW to 15 kW • Standard cable coating in PFA single layer. For the construction of the reference, see following page. GALVATEK S.A.S - 9, rue de la Tour du Mesnil-Renard - 78270 Bonnieres, France www.galvatek.com - Tel. 01 30 93 07 57 - [email protected]

code code N length C length assembly materials code code code code Cable code detailsP = PFA single layer 1 W/cm2 D = PFA double layer 1 W/cm2 GALVATEK S.A.S - 9, rue de la Tour du Mesnil-Renard - 78270 Bonnieres, France www.galvatek.com - Tel. 01 30 93 07 57 - [email protected]