HEATING JACKET I N S U L AT E D H E AT I N G J A C K E T To heat 200 litres plastic or metallic drums Main advantages Large surface contact Heat distibution on the complete surface Low energy consumption Base heaters Faster heating for plastic or metallic drums. May be used together with a heating jacket Ref. 660402 Digital electronic thermostat Equipped with an easy to use thermostat this heating jacket is perfect for 200 litres plastic or metallic drums and can be used for a variety of heating purposes. The durable material and the tight drum fastening straps make the drum heater optimal for transporting and at the same time very long lasting. The outer face is isolated to allow better performance and lower energy losses. This type of device can effectively replace traditional heating belts. Product Specification Material (fabric) : polyester coated with polymer and needled polyester insulation Power cable 3m in polyurethane, type H07BQ-F, 3G 1,5mm2 Protection degree : IP40 Integrated thermostat JUMO • 0° to 90°c • Stable switching point position due to ambient temperature compensation • Maximum switching capacity 16 A, 230 V • Tested according to DIN EN 14597 • 250.000 switching cycles at least • Switching point deviation during the entire operating life of up to ± 5% • Possibility of mechanical limitation of the setting range Ref. 730403 • Protection type max. IP 54 GALVATEK S.A.S - 9, rue de la Tour du Mesnil-Renard - 78270 Bonnières, France www.galvatek.com - Tél. 01 30 93 07 57 Fax. 01 30 93 25 04 - [email protected]