As Control-Therm type T this device integrates also in one single unit the heater, the temperature sensor and the switching circuit. Thermostat technical data - Control range : 0 to 90°C Contact : 1 changeover Switched power : max. 3,45 kW (15A/230V-/~) Hysteresis : ±4K Minimum temperature variation : 1K/min Minimum immersion tube length : 200 mm Maximum immersion tube length : 1000 mm mini. immersion depth B This model is the best adapted solution for use into tanks with a variable or low liquid level. * Nominal length X can also be manufactured differently. mimi. immersion depth B (mm) Heaters reference Heaters reference Heaters ref.erence materials : all PP materials all PVDF PVDF with PP casing Choose PVDF casing whenever temperature is above 80°c or with oxydising chemicals Options and Accessories Extra length of cables Electrical connecting cable C of type H05 VV-F (PVC) Section 3 x 1,5m2 standard length 2 metres Maximum possible X length : 0,5 kW : 1210 mm / 1 kW : 1310 mm 1,5 kW : 1360 mm / 2 kW : 1440 mm 3 kW :1670 mm Wrench (supplied) The Galvatherm heater is only planned to heat liquids. Removable guard Perforated plastic guard in PP only HWB support (supplied) Dimensions : total height 43 mm total length 130 mm fixing height 15 mm GALVATEK S.A.S - 9, rue de la Tour du Mesnil-Renard - 78270 Bonnières, France www.galvatek.com - Tél. 01 30 93 07 57 Fax. 01 30 93 25 04 - [email protected] Universal wrench to open the terminal casing and get access to temperature settings