This model is the best adapted solution for use into tanks with a variable or low liquid level. Thermostat technical data - Control range : 0 to 90°C Contact : 1 changeover Switched power : 16A/250V~ Minimum temperature variation : 1K/2min Minimum immersion tube length : 200 mm Maximum immersion tube length : 1500 mm mini. immersion depth B As Control-Therm type T this device integrates also in one single unit the heater, the temperature sensor and the switching circuit. * Nominal length X can also be manufactured differently. mimi. immersion depth B (mm) Heaters reference Heaters reference Heaters ref.erence materials : all PP materials all PVDF PVDF with PP casing Choose PVDF casing whenever temperature is above 80°c or with oxydising chemicals Options and Accessories Extra length of cables Electrical connecting cable C of type H05 VV-F (PVC) Section 3 x 1,5m2 standard length 2 metres Maximum possible X length : 1500 mm for all Control-Therm type U models Wrench (supplied) The Galvatherm heater is only planned to heat liquids. Removable guard Perforated plastic guard in PP only HWB support (supplied) Universal wrench to open the terminal casing and get access to temperature settings Dimensions : total height 43 mm total length 130 mm fixing height 15 mm GALVATEK S.A.S - 9, rue de la Tour du Mesnil-Renard - 78270 Bonnières, France www.galvatek.com - Tél. 01 30 93 07 57 - info@galvatek.