Catalog excerpts
For Fitting of Products with Big Terminal Casing BC and BC/L Set of Seals O-rings / sealing inserts Terminal Casing BC Material: PP Terminal Casing BC/L Material: PVDF Mounting Sleeve EM for space-saving fitting in supports or in tank cross-beams. Drill-hole diameter: ∅ 87 mm to ∅ 90 mm. Material: EPDM Holding Sleeve HM for fixing in tank cross-beams in cases of high liquid temperature (> 60°C) and exposure of the underside of the casing to highly concentrated steam. Drill-hole diameter ∅ 70 mm to ∅ 76 mm. Material: EPDM Support HB for simple fixing to the tank rim (e.g. for immersion heaters with a max. nominal tube length of 800 mm). Support HWB for fixing long probes and angular immersion heaters. Material: PP or PVDF (HWB/L) Support SHB with integrated holding sleeve HM for fixing immersion heaters with nominal tube length > 800 mm. Material of support: PP Material of sleeve: EPDM Protective Tube SRF with a welded support and integrated holding sleeve protects „sensitive“ immersion tubes (porcelain, glass, PTFE) against mechanical damage. It enables safe fixing of very long immersion tubes up to 2000 mm to the tank rim. Material of protective tube and support: PP Material of holding sleeve: EPDM Support THB with integrated holding sleeve HM for fixing immersion heaters with Anti-Burn-System. Material of support: PP Material of sleeve: EPDM Mounting Wrench SB for opening and closing the terminal cap of big terminal casings BC, as well as dismantling the screw thread
Open the catalog to page 1Mounting Wrench SL for opening and closing the terminal cap of small terminal casings LC and the lead screw fixing. Material: Grivory GVN Mounting Sleeve ML enables space-saving fitting in container lid or tank cross-beams. Drill-hole diameter: 063 mm. Material: EPDM Support HL is screwed firmly onto the tank rim and the terminal casing LC is a simple push-fit. Material: PP or PVDF (HL/L) Support HWL for fixing long probes. Material: PP or PVDF (HWL/L) Recommendations for Usage As with all products with terminal casing care has to be taken, when installing them on the container rim, that...
Open the catalog to page 2All Galvatek catalogs and technical brochures
-
Float Switches - MTS
2 Pages
-
General Product brochure
8 Pages
-
Rotkappe BC
2 Pages
-
Temperature limiter - ETB200
1 Pages
-
MINIBOX - 2M02
1 Pages
-
ROTKAPPE ABS
2 Pages
-
PTFE Rod Heaters GALMAFORM
2 Pages
-
BASE HEATER - 560401
1 Pages
-
Temperature control probes
1 Pages
-
control box
2 Pages
-
Control-Therm Type T
1 Pages
-
Control-Therm Type U
1 Pages
-
Conductive level probe
2 Pages
-
CALOR heating cartridges
2 Pages
-
Rotkappe LC
2 Pages