SMART CUT 850 Inverter Equipment for Plasma Cutting Electric plasma cutting equipment blown with compressed air. Cutting of all types of electrically conductive materials: Steel, stainless steel, aluminum, brass, etc. Inverter system with great portability and high performance. Industrial use. Suitable for manual and automatic cutting (CNC, THC). Basic technical features Supply voltage Regulation range Duty cycle Maximum absorbed power Maximum cutting thickness Minimum airflow needed Recommended compressor Dimensions (width x height x length) Weight 26,1 Kg. Includes: TH-125 6 m torch - Ref.:1603721CX Gas hose - Cable with earth clamp Optional: Accessories Kit TH-125 torch 1/1 Main advantages: - Electronic control of plasma arc power, ensuring stability and parameter repeatability. - Backlit LCD screen indicating status and setpoint and measurement values. - LED indicators for machine power and overtemperature. - Easy operation with control panel featuring encoder and push button. - Cutting power adjusted via rotary encoder. - Back striking pilot arc ignition, minimizing potential interference with other equipment. - Equipped with automation connector as standard, including voltage divider for THC (Torch Height Control) configurable in 5 modes and control signals for CNC. - This equipment features protection against: overheating, lack of pneumatic pressure, overloads in power circuit, contact with hazardous voltages at torch head, contact between workpiece and torch nozzle, and protection against cutting without return ground. Gala Gar, S.L. c/ Jaime Ferran, 19 (Polig. Cogullada) | Tel.: (+34) 976 47 34 10 - 50014 ZARAGOZA | www.galagar.com