Catalogs >
GAI-TRONICS >
Illuminated Crossing Telephone: NETWORK RAIL APPROVED

Illuminated Crossing Telephone: NETWORK RAIL APPROVED
2Pages

Catalog excerpts

Illuminated Crossing Telephone: NETWORK RAIL APPROVED - 1

HUMÈIL , GAI-TRONICS J^i---- -' A division of Hubbell Limi GAI-Tronics Telephony Illuminated Crossing Phone Metal Bodied Weather Resistant Telephone UPDATED! INCLUDES NEW FEATURES • Approved for Level Crossings • PETS I and PETS II compatible • Larger illuminated legend panel • Raised stainless steel button • Soft spring and magnetic catch • Industry standard robust handset c/w armoured cord • CE compliant: R&TTE Directive • Selectable call timer • Robust and weather resistant • Clear, even illumination (white Network Rail Certified Product The Titan Illuminated Crossing telephone is specifically designed and approved for installation at automatic half barrier (AHB) level crossings with Public Emergency Telephone System (PETS I and PETS II). The telephone is fitted with a white back- lit legend panel, which can be used to provide visible instructions at night. A translucent legend sheet can be fitted into the slot provided, accessible only from inside the weather resistant seal. The raised press-to-call button is stainless steel and vandal resistant. The telephone is CB operation only, where lifting the handset loops the line. The call button is configured to give a line break The handset is rugged, has an armoured cord and an Integrity loop that will disconnect the illumination when broken The door uses a soft spring and magnetic catch, giving an ingress protection rating up to IP65 with the door closed. Titan brings state of the art design and technology to metal bodied weather and vandal resistant telephones. It is simple to install and fixings are concealed from view. Cable entries are via standard

Open the catalog to page 1

Illuminated Crossing Telephone: NETWORK RAIL APPROVED - 2

GAI-Tronics Telephony Illuminated Crossing Phone Metal Bodied Weather Resistant Telephone TECHNICAL SPECIFICATIONS Speech: Transmission to BS6317:1982 Ringing: Input: 20-50Hz, 30-100V rms Output: dual tone, 80dBa @ 1m. Typical REN 1 Illumination / On hook leakage: On hook current 6mA ± 10 % Illumination is disconnected if the handset is vandalised. Illuminated panel: 83x90mm LED backlight (white). Includes a receptacle for a legend sheet (66x81mm), accessible from inside the case only. Signalling button: Raised, stainless steel, vandal resistant button Hookswitch: Magnetic / electronic. No...

Open the catalog to page 2