1. Catalogs
  2. GAI-TRONICS
  3. Illuminated Crossing Phone PETS
video corpo

Illuminated Crossing Phone PETS

Illuminated Crossing Phone PETS

Illuminated Crossing Phone PETS

Product catalog summary
Overview: The GAI-Tronics Illuminated Crossing Phone is a metal-bodied, weather-resistant telephone designed for use at automatic half barrier (AHB) level crossings. It is compatible with Public Emergency Telephone Systems (PETS I and PETS II) and approved by Network Rail.
Specifications:
  • Model: Cat. No. 87/037961
  • Illumination: White back-lit legend panel with a translucent legend sheet slot, accessible only from inside the weather-resistant seal.
  • Button: Raised, stainless steel, vandal-resistant press-to-call button.
  • Handset: Rugged with an armoured cord and integrity loop that disconnects illumination if vandalized.
  • Ingress Protection: Up to IP65 with the door closed.
  • Operation: CB operation only, with a call button configured to give a line break signal.
  • Dimensions: H 366 x W 189 x D 130 mm with door closed.
  • Weight: Approximately 5kg.
Technical Specifications:
  • Speech Transmission: Complies with BS6317:1982.
  • Ringing: Input 20-50Hz, 30-100V rms; Output dual tone, 80dBa @ 1m.
  • Power Supply: Powered from the telephone line; On hook voltage 20-70V; Off hook loop current minimum 15mA.
  • Temperature Range: Operating -20ºC to +60ºC; Storing -40ºC to +70ºC.
  • Humidity: Up to 95% non-condensing.
  • Lightning Protection: ITU-T k.21 enhanced levels.
  • Casing Material: Die-cast aluminium, epoxy powder coated.
  • Handset Material: Cycoloy with stainless steel spiral cord.
Certifications and Approvals:
  • Certificate of Acceptance Number: PA05/01757.
  • Compliance: EMC Directive 2004/108/EC, RoHS 2 Directive 2011/65/EC, Low Voltage Directive 2006/95/EC.
  • Standards: Telephone Standards BS6305, BS6317; Safety BS EN 60950-1; EMC BS EN 50121-4, BS EN 55022, BS EN 55024.
  • Quality Management System: Approved by LRQA to ISO9001:2008 & ISO 14001:2004, Certificate No. 861888 and OHSAS 18001:2007 Certificate No. 4004472.
Ordering Information:
  • Part Number: 028-02-3191-652.
  • PADS Code: 87/037961 (replaces 87/037905 / 87/037943).
  • Optional Accessories: Refer to Brochure B150 or visit www.gai-tronics.co.uk.
See more

Catalog excerpts

Illuminated Crossing Phone PETS-1

GAI-Tronics Telephony Illuminated Crossing Phone Metal Bodied Weather Resistant Telephone Approved for Level Crossings PETS I and PETS II compatible Larger illuminated legend panel Raised stainless steel button Soft spring and magnetic catch on door Industry standard robust handset c/w armoured cord Selectable call timer Robust and weather resistant Clear, even illumination (white backlight) Network Rail Approved Product The Titan Illuminated Crossing telephone is specifically designed and approved for installation at automatic half barrier (AHB) level crossings with Public Emergency Telephone System (PETS I and PETS II). The telephone is fitted with a white backlit legend panel, which can be used to provide visible instructions at night. A translucent legend sheet can be fitted into the slot provided, accessible only from inside the weather resistant seal. The raised press-to-call button is stainless steel and vandal resistant. The telephone is CB operation only, where lifting the handset loops the line. The call button is configured to give a line break signal. The handset is rugged, has an armoured cord and an integrity loop that will disconnect the illumination when broken (for example if vandalised). The door uses a soft spring and magnetic catch, giving an ingress protection rating up to IP65 with the door closed. Titan brings state of the art design and technology to metal bodied weather and vandal resistant telephones. It is simple to install and fixings are concealed from view. Cable entries are via standard 20mm glands.

 Open the catalog to page 1
Illuminated Crossing Phone PETS-2

GAI-Tronics Telephony Illuminated Crossing Phone Metal Bodied Weather Resistant Telephone TECHNICAL SPECIFICATIONS Speech: Transmission to BS6317:1982 Ringing: Input: 20-50Hz, 30-100V rms Output: dual tone, 80dBa @ 1m. Typical REN 1 Illumination / On hook leakage: On hook current 6mA ± 10 % Illumination is disconnected if the handset is vandalised Illuminated panel: 83x90mm LED backlight (white). Includes a receptacle for a legend sheet (66x81mm), accessible from inside the case only Signalling button: Raised, stainless steel, vandal resistant button Hookswitch: Magnetic / electronic. No moving...

 Open the catalog to page 2

All GAI-TRONICS catalogs and technical brochures

  1. Public Help

    2  Pages

  2. LED Strobe

    2  Pages

  3. Hood 16dB

    1  Page

  4. Help Point VR

    2  Pages

  5. Hood 23dB

    2  Pages

  6. RigCom

    2  Pages

  7. Sentinel

    2  Pages

  8. VR Help Point

    2  Pages

  9. Help Points

    2  Pages

  10. Elemecplus

    5  Pages

  11. Hood: 23dB

    2  Pages

  12. Hood Post

    1  Page

  13. Accessories

    2  Pages

  14. Ex Sounder

    2  Pages

  15. Hood 9dB

    1  Page

  16. Sonic Alarm

    4  Pages

  17. PullSwitch

    1  Page

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.