The GAI-Tronics Clean Phone faceplate overlay withstands exposure of more than 24 hours duration under DIN 42 115 Part 2 to the following chemicals without visible change: 1.1.1. Trichloroethane (Genklene) Acetaldhyde Acetic acid <50% Acetone Acetronitrile Aliphatic hydrocarbons Ammonia <32% Ammonium chloride <10% Amylacetate Butylcellosolve Cyclohexanol Cyclohexanone Diabasic Ester 5 Diacetone alcohol Dibutyl Phthalate Dichromate Dichromate Diethyl ether Dioctyl Phthalate Dowanol DRM/PM Ethanol Ether Ethlacetate Ferric Chloride Ferric Chloride (saturated) Ferrous Chloride (saturated) Formic acid <50% Fromaldehyde (37%-42%)1 Glutaraldehyde 50% in water Glycerine Glycol Hydrochloric Acid <36% Hydrogen Peroxide <25% Isophorone Isopropanol Lixtop Methanol Methylethylketone Methylisobutileketone N-Butyl acetate Nitric acid <10% Oleic acid Peracetic Acid Petrol Phosphoric acid <30% Potassium carbonate Potassium ferrocyanide/ferricyanide Potassium hydroxide <40% Saturated Salt Solution Silver Nitrate Skydrol 500B4 Sodium bisulphate <50% Sodium carbonate (saturated) Sodium hydroxide 50% Sodium hypochlorite <20% (Bleach) Sulfuric acid <30% Tego 51 Turpentine substitute Toluene Triacetin Trichloracetic acid <50% Water White Spirit Xylene 1 Initial white staining; fades after 24 hours

The GAI-Tronics Clean Phone faceplate overlay is NOT resistant to the following chemicals: Benzyol alcohol Concentrated caustic solution Concentrated mineral acids Dichloromethane Dimethylfromamide High pressure steam at over 100°C Methylene chloride Tetrahydrofuran In common with all polyester based products, the overlay is not suitable for use in conditions of long term exposure to direct sunlight (UV). The GAI-Tronics Clean Phone faceplate overlay withstands 24 hours exposure to the following reagents at 50°C without visible staining: Bleach/toilet cleaner Cream cleaners Furniture polish Hard...