G2 misuratori THE VALUE OF METERING RPmagG2 Electromagnetic flowmeter  Compact digital system, for conductive liquids (>5µS/cm), even with a content of suspended solids  Measurement range: from <0,6m3/h to >70000m3/h  Best measurement accuracy: ±0.2%  Power supply: 85 ÷ 265 Vac or 24 Vdc     Electromagnetic flowmeter consisting of a sensor and a transmitter The flowmeter is used to measure volumetric flowrate for conductive liquids and pulps Several output signals are available The main applications can be found in the following fields: chemical industry, power generation and distribution, mine, water treatment, paper industry, pharmaceutical industry, food and environmental protection The measurement is independent (>5µS/cm) of the density, viscosity, temperature, pressure and conductivity of the measured fluid Available, upon request, MID approved version Available, upon request, Lithium battery powered version Hydraulic performances The electromagnetic flowmeter is not suitable for fluid with big suspended parts No moving parts in the measuring tube. No pressure loss. Low requirement for the upstream and downstream straight pipes. Pipe dimension range Measure range Fluid conductivity Sensor material Lining materials Housing material Electrodes materials Remote version operating temperature Compact version operating temperature Max. accuracy Max. repeatability Fluid velocity Open-collector output Analog output Protocol communication Pulse output Power supply Consumption Protection compact version Protection remote version DN15 ÷ DN1600 <0,6 m3/h ÷ >70000 m3/h >5µS/cm SS 321 rubber; PTFE; aluminium SS 316Ti, Hastelloy B, Hastelloy C, Titanium, Tantalium rubber <80°C – FEP <100°C – PTFE <150°C (180°C peak value) <70°C ±0,2% ±0,07% 0m/s ÷ 10m/s 30V; 250mA 4 ÷ 20mA; max. load 750Ω RS485 (optional); Modbus (optional); HART (optional) 1 ÷ 5000Hz 85 ÷ 265 Vac o 24 Vdc <20W IP67 with 2 cable gland M20 x 1,5 for electrical connection IP67 / IP68 only pipe (optional); with 4 cable gland M16 x 1,5 for connectiong the electronic unit to the measurement pipe; with 2 cable gland M20 x 1,5 for electrical connection Continuous development of our products may necessitate changes in details without prior notice 09/19. G2 misuratori S.r.l. 14100 ASTI (AT) – ITALY Via San Martino, 38 Telephone +39.0141.727749 Telefax +39.0141.702280 E-mail: inf