1. Catalogs
  2. Fynbo Technology
  3. PG-SSA-1416-AA-41

PG-SSA-1416-AA-41

PG-SSA-1416-AA-41

PG-SSA-1416-AA-41

Product catalog summary
Product Information
This manual provides details for the Schunk gripper model PG-SSA-1416-AA-41, which is part of the automated gripping systems.

Manual Gx System
The document includes assembly instructions for the arm connector, arm, and finger components. It specifies the use of screws: 2 x M3x8 and 4 x M5x16 for one configuration, and 3 x M3x8 and 6 x M5x16 for another.

Fingers Positioning, Range & Offset
  • PGN Plus-P-80-1 Gripper: The table provides positioning, range, and center offset details for square and round fingers, both with and without rubber bands. The range varies from 0 to 103 mm, with center offsets alternating between 0 and 7 mm.
  • JGZ 80-1 Gripper: This section details the positioning for round fingers with rubber bands, with ranges from 1 to 107 mm and similar center offsets as the PGN Plus-P-80-1.
See more

Catalog excerpts

PG-SSA-1416-AA-41-1

MANUAL For Schunk gripper Product Information Manual Gx system

 Open the catalog to page 1
PG-SSA-1416-AA-41-4

Fingers positioning, range & offset for grippers: PGN Plus-P-80-1 Finger Type Square Fingers Round Fingers (without rubber band) Round Fingers (with rubber band) Fingers positioning, range & offset for grippers: JGZ 80-1 Position Finger Type Round Fingers (with rubber band)

 Open the catalog to page 4

All Fynbo Technology catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.