Mechanical and Dimensional Specifications

The document provides detailed mechanical dimensions and tolerances for a module with a stepper motor (model 60102) mounted on the right side. Key mechanical limits include a home position at 136 mm and effective stroke lengths defined as S + Safety Stroke (10 ± 1 mm), with effective stroke values ranging from 50 mm to 1050 mm.

Dimensions such as module length (L) are calculated as L = S + 234 mm, with lengths varying from 284 mm to 1284 mm depending on stroke length. Module weights increase progressively from 6.2 kg at 50 mm stroke to 14.2 kg at 1050 mm stroke.

Fastening and Mounting Details

The module features bilateral symmetry with 4-M4 screws (8 mm depth) and 6-M5 screws (15 mm depth). M6 square nut slots are located at the bottom for mounting. Dimensional tolerances vary by size range, with linear tolerances from ±0.1 mm to ±2 mm depending on dimension length, and geometric tolerances ranging from 0.02 mm to 0.4 mm.

Material and Surface Treatment

Material codes and surface treatments are specified, including heat treatment processes. Surface roughness values are indicated, with typical roughness ranging from 0.25G to 8.0 μm depending on the surface.

Standards and Revision Information

The document includes a revision table with dates and responsible personnel, emphasizing standardization and process control. The drawing scale is 1:5, and the document is marked as a technical file belonging to the company, with restrictions on unauthorized copying.

Summary of Critical Parameters

• Effective Stroke (S): 50 mm to 1050 mm
• Module Length (L): S + 234 mm
• Module Weight: 6.2 kg to 14.2 kg depending on stroke
• Mechanical Limits: Home position at 136 mm, safety stroke 10 ± 1 mm
• Fastening: 4-M4 screws, 6-M5 screws, M6 square nut slots
• Tolerances: Linear ±0.1 to ±2 mm, Geometric 0.02 to 0.4 mm
• Surface Treatment: Heat treatment and specified roughness