Mechanical Specifications and Dimensions

The document provides detailed mechanical dimensions and specifications for a linear motion module, including bilateral symmetry with 4-M4 screws and mechanical limits at positions 86 and 231 mm. The home position is set at 151 mm, with an effective stroke defined as stroke length plus a safety stroke of 10±1 mm, totaling 88 mm in one example. Various dimensional parameters such as hole sizes (4-4H7 10, 6-M5 15), distances (e.g., 130 mm, 70 mm), and tolerances are specified.

Stroke and Module Length Relationship

The effective stroke (S) ranges from 50 mm to 1050 mm in increments of 50 mm. Corresponding module lengths (L) range from 401 mm to 1401 mm, increasing by 50 mm increments plus a base length. The relationship is given by L = S + 351 mm. This allows for customization of module length based on required stroke.

Weight and Motor Options

Module weight increases with stroke length, starting at 5.6 kg for 50 mm stroke and reaching 13.6 kg for 1050 mm stroke. Optional motors include stepper motors (57/60 mm diameter, 86 mm diameter) and a 400W servo motor (70 mm diameter). The motor depicted is a 60102 stepper motor for reference; actual motor dimensions may vary.

Material, Surface Treatment, and Tolerances

The document references material codes and surface treatments, including heat treatment and surface roughness specifications. Dimensional tolerances vary by size range, for example ±0.1 mm for dimensions between 3 and 60.5 mm, increasing up to ±2 mm for dimensions between 2000 and 4000 mm. Geometric tolerances are also specified, with values ranging from 0.02 mm to 0.4 mm depending on the dimension range.

Additional Notes

The module includes M6 square nut slots at the bottom. The document is a technical file from a company named 福誉科技 and is restricted from unauthorized copying. The drawing scale is 1:2 and 1:4 in different views. The document was revised and approved on August 7, 2025.