Technical Drawing Overview

This document is a technical drawing and specification sheet for the component model FBL60-60102D-R V2, dated August 13, 2025. It includes detailed dimensional data, assembly instructions, and manufacturing tolerances.

1. Dimensional Specifications

• The drawing specifies multiple dimensions in millimeters, including lengths (L), effective stroke (S), and distances related to the sliding table origin.
• Length (L) is calculated as L = S + 224, where S varies from 100 mm to 3900 mm in increments of 100 mm.
• Corresponding values for L range from 324 mm to 4124 mm.
• Number of mounting holes (N) varies with length, starting at 12 for shorter lengths and increasing up to 26 for the longest lengths.

2. Fastening Details

• Mounting holes include:
• 6 holes for M5 screws, 10 mm depth
• 4 holes for M4 screws with 6H tolerance
• 12 holes for M3 screws
• Additional holes for M6 screws with 8 mm depth

3. Tolerances and Surface Treatment

• Dimensional tolerances depend on size ranges, for example:
• ±0.1 mm for dimensions between 3 mm and 60.5 mm
• ±0.2 mm for 30 mm to 120 mm
• Up to ±1.2 mm for dimensions between 1000 mm and 2000 mm
• Geometric tolerances (form and position) are specified with values ranging from 0.02 mm to 0.4 mm depending on dimension ranges.
• Surface roughness and heat treatment details are indicated but not fully specified in the excerpt.

4. Material and Weight

• Material and weight information is partially indicated, with weight values such as 0.25g, 1.6, 2.0, and 8.0 (units not fully clear).

5. Notes and Restrictions

• The document is proprietary to Fuyu Technology and copying without permission from the Document Control Center is prohibited.
• Standardization and process control are emphasized.

Summary

This technical document provides comprehensive mechanical specifications for the FBL60-60102D-R V2 component, including detailed dimensional data, mounting hole configurations, tolerances, and manufacturing notes. It is intended for use in precise mechanical assembly and manufacturing processes, ensuring compliance with specified tolerances and quality standards.