Catalogs >
FUTEK Advanced Sensor Technology, Inc. >
USB520 series

USB520 series
3Pages

Catalog excerpts

FUTEK ADVANCED SENSOR TECHNOLOGY, INC. FEATURES • USB 2.0 Communication Link • USB Bus-Powered (5V) • Input/Output Short Circuit Protection • Streaming ASCII Output • Offered with DLL/Mac Dynamic Library • CE Approved Class A (required for Medical and Aerospace applications) • Industrial metallic enclosure • Integrated DIN rail mount • Supports, VDC, mA, mV and TTL type input • Lends itself to a multitude of industry applications through its support of amplified input IMPORTANT NOTE: ONLY CONNECT DEVICE TO USB 2.0 PORT SPECIFICATIONS GENERAL Sampling Rate Bandwidth (Hz) Internal Resolution Resolution (Noise Free) Non Linearity (max) Output Integrated Digital Filter On Chip Memory Stored Calibration Weight On Chip Sensor Profiles ASCII Output Update Rate IP Rating ENCODER INPUT Encoder Input Speed Measurement Angle Measurement (a) Angle/Speed Measurement (Update Rate) STRAIN GAUGE mV/V INPUT Bridge Excitation Standard Input Range Optional Input Range Min. Bridge Resistance Max. Bridge Resistance VOLTAGE INPUT Supply Voltage Standard Input Range CURRENT INPUT Supply Voltage Standard Input Range CONNECTORS Sensor Connector Mating Connector USB 2.0 Connector 1 Speed = A a x 60 / PPR Up to 4800 SPS Sampling Rate (SPS) / 4 24 bits See Chart on Page 3 ± 0.005% of FSR Digital Packetized Data 50 Hz/60 Hz Rejection (100 dB) 1 Kilobyte Up to 16 Points 0.43 lb (195 g) Up to 4 10 SPS IP50 Quadrature Leading and Lagging Pulse (TTL) Up to 150k Pulses Per Secondi Up to 10k Pulses Per Rotation (PPR)i 100 ms Selectable 5,9,10,12,15,18,20,24 VDC/1W 0-20 mA (Factory Default) Sensor Solution Source Load • Torque • Pressure • Multi-Axis • Calibration • Instruments • Software www.futek.com RoHS & \ KlSOg ■*»

Open the catalog to page 1

Model USB520 2 DIMENSIONS inches [mm] SPECIFICATIONS (continued) ENVIRONMENT Operating Temperature -13°F to 185°F [-25°C to 85°C] Note: Shield should be connected to cable clamp of binder cable assembly when connecting on instrument side. Sensor cable shield connections should be grounded on one end, either the sensor side or the instrument side, to avoid potential ground loops.

Open the catalog to page 2

SAMPLING RATE A +E + Excitation / + Sense F +Vcc Supply Output ACCESSORIES • FUTEK's SENSIT™ Software (FSH03189) 14 Day Trial - Available to download on FUTEK website. A license is required, per seat, after 14 days to benefit the features such as data logging, graphing, etc. Trial version turns into basic read-out ONLY after 14 days and a product key is required to enable the features. • USB 2.0 Hi-Speed A/B Cable (GOD04123, included) • 12-PIN Binder Male Plug, 99 5129 00 12 (GOD02975 , included) K +V + Amplified Input L PLEAD Leading Pulse M PLAG Lagging Pulse Drawing Number:...

Open the catalog to page 3