*mydirectindustry

TDF650

1 / 2 PagesView full catalog

TDF650

Product catalog summary

Features

Seamless integration into OEM applications
Designed specifically for torque auditing
Constructed from stainless steel
Utilizes strain gauge technology

Specifications

Performance: Nonlinearity, Hysteresis, and Nonrepeatability are all within ±0.1% to ±0.2% of Rated Output (RO).
Electrical: Rated Output is 2 mV/V nominal, with a maximum excitation of 20 VDC or VAC. Bridge resistance is 700 Ohm nominal. Connection is via a 6 Pin BENDIX Receptacle.
Mechanical: Weighs approximately 46 oz (1.3 kg) with a safe overload capacity of 150% of RO. Made from 17-4 PH stainless steel and red anodized aluminum. IP Rating is IP40.
Temperature: Operating temperature ranges from –60 to 200°F (–50 to 93°C), with compensated temperature between 60 to 160°F (15 to 72°C). Temperature shifts for zero and span are ±0.002% of RO/°F.
Calibration: Standard calibration is 5-point clockwise, with an available option for both clockwise and counterclockwise. Shunt calibration value is 100 kOhm.

Model TDF650

Flange-to-Square Reaction Torque Sensor with active and fixed ends.
Dimensions and capacities include a 1-inch square drive and torsional stiffness of 3.60 x 10⁶ in-lb/rad.

Connection Details

Pin configuration for the BENDIX 6-PIN includes color-coded descriptions for excitation, signal, and TEDS data.

Additional Information

FUTEK reserves the right to modify design and specifications without notice. For complete terms and conditions, visit their website.

Catalog excerpts

FUTEK ADVANCED SENSOR TECHNOLOGY, INC. SPECIFICATIONS PERFORMANCE Nonlinearity Hysteresis Nonrepeatability ELECTRICAL Rated Output (RO) Excitation (VDC or VAC) Bridge Resistance Connection Wiring Code MECHANICAL Weight (approximate) Safe Overload Material IP Rating TEMPERATURE Operating Temperature Compensated Temperature Temperature Shift Zero Temperature Shift Span CALIBRATION Calibration Test Excitation Calibration (standard) Calibration (available) Shunt Calibration Value FEATURES • Easily integrates into OEM applications • Designed for Torque auditing • Stainless-steel construction • Strain gauge based 46 oz [1.3 kg] 150% of RO 17-4 PH stainless-steel (flexure) Red anodized aluminum (cover) IP40 -60 to 200°F (-50 to 93°C) 60 to 160°F (15 to 72°C) ±0.002% of RO/°F (0.0036% of RO/°C) ±0.002% of Load/°F (0.0036% of Load/°C) 10 VDC 5-pt CW 5-pt CW & CCW 100 kOhm Sensor Solution Source Load - Torque - Pressure - Multi-Axis - Calibration - Instruments - Software www.futek.com ^ JJ, MlSOg J-i>J tf.fr 9001 & \ KISOk -*■» tf.fr 13485 U.S. Manufacturer

Open the catalog to page 1

Model TDF650 2 DIMENSIONS inches [mm] CAPACITIES ITEM # in-lb Nm Square Torsional Stiffness Drive in-lb/rad Sensor Receptacle View BENDIX 6-PINPIN COLOR DESCRIPTION TEDS DESCRIPTION A Red + Excitation + Excitation B Black - Excitation - Excitation C Green + Signal + Signal D White -Signal -Signal E Orange + Sense TEDS Data F Blue -Sense TEDS Ground Drawing Number: FI1473-A FUTEK reserves the right to modify its design and specifications without notice. Please visit http://www.futek.com/salesterms for complete terms and conditions. 10 Thomas, Irvine, CA 92618 USA Tel: (949) 465-0900 Fax: (949)...

Open the catalog to page 2

All FUTEK Advanced Sensor Technology, Inc. catalogs and technical brochures

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list